Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood cart replacement

Featured Replies

I've got an 18x24 detached garage I call my shop. Over the years as the number of tools increased I hit the breaking point where I no longer had enough storage for all the extra hardware and tools. Something had to be done.

 

Many years ago I build 2 carts, one for plywood, and one for dimensional lumber and scraps. They both wound up being conveinent places to hold crap, and consuming floor space at that. So about a year ago I start the shop makeover. Including insulation, better lighting and storage. Finished the painting last fall, and time for the more interesting parts.

 

Attached are the old carts

 

First the dimensional lumber/scraps

post-4489-0-83151400-1391438123_thumb.jp

post-4489-0-28586900-1391438123_thumb.jp

 

And of course the A-frame plywood cart

post-4489-0-99330100-1391438222_thumb.jp

 

There need to be a better way to turn the 2 carts into one that was better.

  • Author

So, the task at hand, a new cart with plywood on one side, and dimensional lumber on the other, with a place for scraps on the bottom.

 

First step was creating the verticle spine pieces out of plywood. I used a jig and the Festtool saw to cut the sloped side for plywood.

post-4489-0-55643900-1391438333_thumb.jp

 

Pair up and glue the pieces for the middle 2 laminated pieces

post-4489-0-59995700-1391438664_thumb.jp

(I used dominos to align the one edge, makes for easier gluing)

 

Drilled the stake holes for the diminension lumber supports

post-4489-0-36378700-1391438358_thumb.jppost-4489-0-94496200-1391438358_thumb.jp

 

Complete

post-4489-0-48562200-1391438359_thumb.jp

 

 

  • Author

Next, the middle laminant layers for the horizonal part of the spine

post-4489-0-68293600-1391438746_thumb.jp

 

And glusing the spines together with outside verticle layers.

post-4489-0-23667500-1391438747_thumb.jp

 

And the fiist glimpse of what my vision will look like

post-4489-0-70754200-1391438821_thumb.jppost-4489-0-26170300-1391438822_thumb.jp

 

Add in the 1/2" plywood for structure

post-4489-0-36845500-1391438852_thumb.jppost-4489-0-91531700-1391438852_thumb.jp

  • Author

BTW, that gap in the middle on the plywood side was designed for a hand or other material handle tool for the plywood.

BTW, that gap in the middle on the plywood side was designed for a hand or other material handle tool for the plywood.

That is a great design LoneRider, a very good combination of the others that you had! Very cool. I too am in the process of re-imagining my shop!

  • Author

That is a great design LoneRider, a very good combination of the others that you had! Very cool. I too am in the process of re-imagining my shop!

 

Thank you.

 

As they boys have said, sometimes it is a shop hobby, not a wood working hobby.  Where Marc could justify paying for a lot of work to be done, making sawdust is not an income source.But I was finding I was spending more time jacking with tools and equipment than getting stuff done. Getting the shop/garage to a point where I can put away tools after I am done with them easily will make future projects go a lot quicker, and reduce the frustration factor, which will help me get in there.

Thank you.

 

As they boys have said, sometimes it is a shop hobby, not a wood working hobby.  Where Marc could justify paying for a lot of work to be done, making sawdust is not an income source.But I was finding I was spending more time jacking with tools and equipment than getting stuff done. Getting the shop/garage to a point where I can put away tools after I am done with them easily will make future projects go a lot quicker, and reduce the frustration factor, which will help me get in there.

I am sure it will (<<make future projects go quicker...>>) and that is one of the motivating forces behind me redoing my shop space. I need to get to a point where I can store everything somewhere and free up the center to permanently place the big tools. Let me know how it works out for you!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.