Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust Collector Filter Upgrade

Featured Replies

I have a 2hp Grizzly Cyclone dust collector supporting my shop for over 5 years. I recently had a situation where the plastic bag came loose. I reattached it, but noticed that when the collector was running the pressure on the bag was quite high - not quite a basketball, but harder that a well inflated balloon. 

 

Even though I have been using the cleaning brushes in the filter regularly and occasionally using compressed air, the filter had clogged up to the point where it was costing several pounds of static pressure. Rather than replace the cartridge filter, I decided to replace it with a bag filter system.

 

I purchased 8 bags measuring 6 inches in diameter and 64 inches long and built upper and lower plenums to connect them. The upper plenum mounts directly on the side of the collector and the lower one sits on the floor. Bag filters gather a cake of dust on the inner surfaces that falls off when the pressure drops. A little shake helps the process. The dust collects in the lower plenum, hence the clean out slot and cover.

 

With the new filters in place, the back pressure is minimal and the air flow in the system has easily doubled. The only downside is the increased airflow in the ducts increased the noise level in the shop.

 

PS - I can't seem to get the last picture to rotate. It shows correctly on my computer and dropbox.

post-457-0-12936000-1391697411_thumb.jpg

post-457-0-47659400-1391697427_thumb.jpg

post-457-0-13331300-1391697447_thumb.jpg

post-457-0-66693600-1391697467_thumb.jpg

post-457-0-05881900-1391697767_thumb.jpg

Very cool hack of the Grizzly Mike! Do you have any way of measuring to see if you really have gained improvements in filtering? Particle meter or anemometer? On another forum we had done a collective purchase of a particle counter... wish I had gotten in on it as I could have used one when I was building a ambient cleaner.

  • Author

Unfortunately, I don't have access to the instrumentation to do a scientific analysis. The only data points I have are:

 

1. The difference in back pressure, as measured by the pressure on the bag under the filter and on the tubes in the new filter is significant.

 

2. The first time I turned it on, I could hear all the chips that had settled in the pipes moving to the collector.

 

3. I can now leave several gates open and still get adequate pickup. Before the change, if there was a second gate open, the planer would not get cleared properly.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.