Fxguy Posted January 1, 2015 Report Posted January 1, 2015 Hey everyone! My wife got me a Bosch 1617EVSPK Router kit for Christmas to replace my Ryobi router that I've been using for years. Looking forward to making some Lincoln Logs for my son with it as soon as the bit arrives! My only problem is I'm trying to figure out which of the Rockler plates I need to be able to mount this on my router table. I looked at Group A and Group D. The group A lists Bosch 1617-1618, and group D lists Bosch 1619-1619EV, but when I printed the reference for either of these none of the holes line up at all! Am I to understand that there is a difference between the Bosch 1617 and the Bosch 1617ESV router as far as a rockler plate is concerned? I bought a blank plate for my Ryobi and drilled the holes myself but wasn't the most pleasant experience and would like to avoid having to do it again if at all possible. Thanks! Tim Quote
mikem Posted January 3, 2015 Report Posted January 3, 2015 Congrats on the new router! I have two of the 1617 kits, one being dedicated in my router table. They are great routers. The 1619 is Bosch's large 3hp plunge router so it may have some additional screw holes that the 1617 doesn't have. Quote
BuilderBill Posted January 4, 2015 Report Posted January 4, 2015 If you haven't built the table you might consider not using a plate at all, just remove the plastic baseplate from the router and bolt it directly to the underside of the top. You don't need a thick top, just something flat and the framework underneath to keep it that way: http://patwarner.com/router_table.html HTH, Bill Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.