ringo34 Posted March 21, 2020 Report Share Posted March 21, 2020 Hi I Have to say, I am pretty new in pro woodworking so looking for your help. I have made previously some speaker boxes, veneering, etc. (they came out very elegant), but here I am stuck and do not have experience how to proceed. I receive VERY GOOD, NICE high end Denon DP60L turntable from US, but unfortunately shipping damaged couple of corners. They look soo bad, I can glue them, but still whole turntable looks then still damaged. Bought new dustcover also, which also got damaged. Damn!! Final goal is I try to get it back into mint condition So, turntable plinth is covered with magnificent rosewood (palisander, santos) veneer. It is very thin, so it looks almost like a thick paper. Thats results very nice sharp corners, where you do not see veneer edge. Veneer could be maybe 0.3mm thick. Most turntable corners have standard veneer overlapping and then sanded down, which gives us a bit rounded edge. But this Denon, which I really like it, has nice sharp edge. It also looks that veneer is sanded in factory, because it looks very smooth and do not show up any imperfections/creases. So my first problem – how I can thinning down rosewood veneer into ca 0.3mm thickness. Sanding before veneering or what do you suggest? Second problem – turntable veneer looks a bit brownish-reddish color (red), regular rosewood is more towards brown. So my first guess is that in factory, they have colored veneer with stain and the top coated with some varnish - acryl or polyester lacquer? What do you think how can I achieve same results as in factory? II Things have improved a bit. I decided to use easiest option first, so to restore coating/varnish. If that does not succeed I will reveneer it. So I started sanding down old varnish, grit 120. Please have a opinion what type of varnish this could be?: 1) first sanding dust was a bit yellow, brownish, very thin layer (added picture also from layer) 2) then sanding dust soon changed to milk-white (see pics). This was quite nice layer, took some time 3) then appear veneer and dust colored into reddish, brownish. Probably stain? Next question: 4) what do you think, what wood of veneer is that? It is definately palisander (rosewood), but Santos, Rio, East-Indian, Boliwian? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.