Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Walnut Slab Table

Featured Replies

I've been lurking here for a bit and gathering up all the great advice you have to offer for a project I'm starting on.

I recently bought a large slab of black walnut to make into a dining room table. Here are some of my plans, but I'm open to ideas. I'm going to leave the live edges as is. Keep the center crack unchanged. Fill the voids on the left edge with clear epoxy. Trim the lower left hand end. I would also like to use a grain filler - Crystalac so that I can get a clear mirror like finish. Coat the whole thing with Waterlux Original. I really want a finish where we don't see the grain coming through and one that heightens the natural color and curl / marble of the wood. Oh and the finish needs to be pretty bombproof without looking to plastic like.

Right now I'm sanding the underside of the slab and a couple of small test pieces to make my mistakes on. So far what I've learned is that Waterlux - after four coats doesn't give enough build to not show the grain. I do like how it shows off the color though. On one test piece that was sanded up through 320 I have put a seal coat of Waterlux, then one coat of Crystalac. I have another piece done the same way, but with a second coat of Crystalac on it. Both are curing and await sanding and a coat of Waterlux.

Any suggestions?

post-6457-0-91903000-1329596803_thumb.jp

  • 4 months later...

I know I'm late to this post but here goes...

I experimented recently with making some parquet floor tiles out of some sticks of firewood. I assembled some pieces and poured Mirror Coat epoxy over them. I have to say it looks amazing after two applications; absolutely smooth and super shiny. Of course, not everybody likes that plastic-coated look but I'll bet it's pretty impervious to damage. It seems slippery when wet though.

Anyway - Mirror Coat epoxy is easy for something like this. Pour it on and it levels itself out. You have to stay with it for awhile and deal with the drips over the side but that doesn't go on forever.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.