Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

DW734 Planer Blades – Replace out of the box?

Featured Replies

hi,

I just bought a DW734 planer. I've heard from several people with the DW733 that they immediately replaced the knives on the planer... but for various reasons. One said the knives weren't sharp enough (and said they had heard, in turn, that those knives couldn't be sharpened); another said they wanted carbide tipped knives in there; a third said the default knives weren't reliable, and also chose not to try sharpening the planer knives.

Any thoughts on that here?

thanks,

etienne

I have heard a lot of groaning about the Dewalt planer blades, and while I won't disagree that the first step of most power tools is to replace the subpar blade, I haven't had any issues with my Dewalt's blades. On the other hand, context is important: I don't run the planer as often as others. And I have to wonder if the ones who wear down the blade quickly are doing so by trying to take too aggressive of cuts, etc.

Either way, I would personally get your mileage out of the existing blades regardless of how long they last, before changing them out.

  • Author

I wonder too if those who complain about the dewalt blades are taking too aggressive cuts. The instruction manual for the 734 lists quite conservative maximums for the amount of thickness to take off in one pass... a 6" or wider for the board, you need to at or stay under 1/32.

I've been using 3 rotated and resharpened sets of the default knives on my 733 for 12 years. There is nothing wrong with DeWalt knives or the 733.

The 734 has double-sided, "throwaway" knives. If your 734 isn't sharp enough to thickness most woods out of the box, you either have a dud or a used machine, or you're not using it correctly. Think about it... They installed a knife that isn't designed to be resharpened. Wouldn't you expect it to work as advertised?

On another note... Have you tried it?

  • Author

On another note... Have you tried it?

Yes, I have tried it. The results looked fine to me: smooth, flat, etc. However, this is my first thickness planer. And I'm not super confident about judging good results vs. mediocre results. That's why I asked.

etienne

Yes, I have tried it. The results looked fine to me: smooth, flat, etc. However, this is my first thickness planer. And I'm not super confident about judging good results vs. mediocre results. That's why I asked.

ve

You're better than you know! :)

Planers are pretty basic. One 'net falsehood about planers is that they leave a "finish". Planers are dimensioning tools, they simply make boards thinner, with the planed face parallel to the original (face down) face. That's it... The "finish" surface is put there with hand planes, scrapers, sandpaper, or a combination of the three. There isn't a planer knife in the world that leaves a surface suitable for finishing.

Certain woods, like figured maple, some quartersawn oaks, and others, are very difficult for a straight knife to plane. That's any straight knife, carbide included... Any straight knife is capable of downright destroying birdseye maple. Carbide might last longer, but it is subject to chipping, and is more difficult (expensive) to sharpen. The only way to truly reduce tearout on some woods is to change the entire head to a segmented cutter. Better segmented heads cost more than most portable planers.

All that said, simply understand the limitations of the tool. In chippy woods take very light final passes on your show face.

If it seems to be working for you, I'll bet it is!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.