Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust Collector Blower

Featured Replies

I recently build a 1.5HP dust collector blower, based off of Bill Penz's design. It has a 14.5 inch impeller, and is designed for 6 inch ductwork (well, sortof, I think I may have messed up the caluclations for the outlet, but I think it's close enough).

It's made out of three quarter plywood, half of which is quite old and in terrible shape, the other half new. I did use a one quarter sheet for the back of the blower at one point, but replaced it pretty quick. I first built this with a 1/3HP motor (it was all I had), before progressing to an old 1.5HP motor I got from my grandfather.

The unit is far from perfect, as is the mount it sits on top off. Both will require more work before I can subject this thing to any kind of serious use. I still have to figure out ductwork; I'll at least need to run lines to the lathe and the tablesaw, but the other tools may have to make due with the shopvac or a flexible hose connection to the collector for now, depending on cost.

I'm not sure I'd recommend this project to anyone who doesn't have a spare motor lying around, since if you add in the cost of buying a new motor, you'd probably come out at about the same cost of simply buying a dust collector unit.

Anyway, here are some pictures:

The finished unit:

The original motor:

And the new motor:

A shot of the impeller (which I found at a military surplus scrap yard):

The metal insert, which deceptively looks like Bill's design but actually isn't (I made it so I could tighten the vice collar thingy the impeller uses to attach to the shaft, and the insert is actually smaller than the impeller. So, no easy disassembly of the blower for me).

And another shot of the final unit.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.