Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Issues with JET JWL1442

Featured Replies

Hey guys I'm new here and recently pick up this new 1442 jet lathe but seems like it's having an issue with the reeves drive. It looks like the belt at the highest rpm start wobbling at 3000RPM at the 2300 RPM does fine, at 1900 makes a noise... I have a video to show and maybe someone can help me.

  • Author

Looks like I don't have permissions to post the videos I took with the iPhone. Any idea to see if I can upload it somewhere so I can get help ?

Thanks

Adam

By the way the picture shows the belt with not much wear and tear and how do u see the model?

Adam, I had a1442 and had a problem with the drive one time. Itook the belt off, used silicon spay to lubricate the mechanism and then put the belt on.neverhada problem after that. The belt looks fine, it is more than likely the drive needs lube. I took the belt off so I wouldn't get lube on it.

BRuce

  • Author

Bruce look at this 2 videos and tell me what you think...

 

 

 

 

Thanks !

Adam, the first video indicates 2 problems. 1st, as I suspected, the pulley assembly on the motor is sticking. That is why it jumped a out halfway through the video. Take the belt off and get some one to drop a block of wood between the pulleys while you pull them apart. Then clean and lubricate the shaft. With silicon or lithium grease (just a very little).

2nd problem is the belt tension is too loose at the highest speed. The belt should not bow out like it does, it should maintain the same tension from low to high speed.

BRuce

  • Author

Bruce,

 

Thanks for the advice... this is what Ive done today:

 

Took the headstock apart, removed old belt removed all 3 bearings installed new ones, tried to put all back together and im stuck because the shaft is not going all the way thru and my gears are not moving because the pulley is closed and wont go anywhere, and by default I have not been able to sit the belt. So I'm stuck!

 

here are some pictures, please help! how can I make the pulleys move? and make the shaft sitting right?

 

Thanks

post-12977-0-46867400-1361339432_thumb.j

post-12977-0-37263300-1361339433_thumb.j

post-12977-0-36754300-1361339434_thumb.j

post-12977-0-21375100-1361339435_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.