Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust collection information

Featured Replies

Hello,

I am I the market for a cyclone dust collector (grizzly 3hp. Seems to be most bang for the buck). I have some unanswered questions. Can anyone recommend some reliable information (preferably a book). I QUICKLY looked over bill Pentz website. He seems very opinionated. Seems anything under 6" ducting will do nothing but keep the shop looking clean. Maybe he's right? Is his information the "be all end all"? The grizzly has an 8" intake, but most tools have a 4" port. No good? Any info will help, especially a good book recommendation. Thank you

Yes, Bill is opinionated but he has spent a long time formulating that opinion. You can do anything you want but I think most members of this forum will agree that size matters. I had a 2hp non cyclone feeding a 4" trunk and drops. After purchasing a cyclone and before installing it, I replaced the ductwork with 6" and even with the original DC, the performance was much better. The size of the dust port on machines is not indicative of what they need, it is an indication of the predominant piping size. You can compromise by running a 6" main trunk and 4" drops. It it is a compromise but it does work. I made a 6" port for my TS and BS. My planner and drum sander have very short 4" flex directly to a 4 to 6 adapter. You are looking for volume of air not suction. I believe that the Wood Whisperer has a cyclone and 6" or better ducting also.

YMMV,

BRuce

I modified my ports to 5 inch, which is as large as my collector can handle. I use a 1.5 HP model, and roll it around to machines as I need it.

Hello,

I am I the market for a cyclone dust collector (grizzly 3hp. Seems to be most bang for the buck). I have some unanswered questions. Can anyone recommend some reliable information (preferably a book). I QUICKLY looked over bill Pentz website. He seems very opinionated. Seems anything under 6" ducting will do nothing but keep the shop looking clean. Maybe he's right? Is his information the "be all end all"? The grizzly has an 8" intake, but most tools have a 4" port. No good? Any info will help, especially a good book recommendation. Thank you

Ill give you my opinion be it right or wrong. I did everything by the book, built a new shop, layed out the machines, hired an air handler engineer. I put in all pipe from penstate, the cheap stuff. I mounted my DC outside way up high above the ceiling level of my shop. Fired that new toy up and was enjoying my coffee thinking damn this thing is loud when all of the sudden I thought my shop exploded. All the pipe colapsed.

Angry I threw in the towel and ran to Home Depot and bought a bunch of 4" pvc. I reinstalled the whole system with just 4". It looks real nice. It works very well, Im the guy with the very sterile shop no dust anywhere. I have the Griz 3Hp its loud even being outside. It needs a 30a breaker so make sure you have that.

I wouldnt spend to much time over thinking it unless you have a big shop. I have no blast gate on my table saw so for other tools there is always two open pipes and it works great.

It is connected to:

PM2000 table saw

5hp PM Shaper with two 4" connections.

20" PM planer

12" PM jointer

24" PM bandsaw

25" PM double drum sander

Kreg pocket hole machine / not jig.

I can forget to close blast gates without worry it works fine with all the gates open so I really dont think its lacking flow. I wouldnt over think it, but I would get a different more quiet collector if I was going to do it again.

Don

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.