Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

TWW video - "POP GOES THE MAPLE"

Featured Replies

I have some beautiful Curly English Sycamore where I want to "Pop The Grain" like Marc (TWW) did in his video "Pop Goes The Maple". In the video, when he went over to the cabinet where he stores his coloring agents, he first handled a small container that said, "TRANSFAST" and then he said, "that could work" but he opted for "TransTint" instead.

My question is, if he would have used the "Transfast" insted, how exactly would he have made the recipe. "Transfast" is a Aniline Dye, where you have to mix with water. Would he have first mixed the dye and water together in a separate bowl and then add the shellac, then put it on the wood? Any suggestions would be greatly appreciated.

Thanks,

Greg

The shellac is completely optional. If I wanted to use a water-based dye for this, I would add the dye/water mixture to the surface first by itself. I might then use some shellac to seal the color into the surface and prevent topcoats from pulling up color. 

 

The only reason I used a small amount of shellac in the original mixture is to act as a bit of a binder. Hard to say how much actual impact it has since we're sanding back after the dye application, but I like to use it when I can.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.