Chuck Melton Posted April 15, 2013 Report Posted April 15, 2013 I picked up a 1hp Jet dust collector this weekend and the only thing I have with a 4" port on it is my planer. My table saw is the first up to be retrofitted for dust collection. I bought a plastic table saw dust collection plate at wood craft today and my immediate inclination is to build a box to sit under the saw with that plate as one of its sides. Should I instead try to built a box that affixes to the underside of the saw and uses the plastic dust collection panel as the bottom? Quote
EdgewaterWW Posted April 15, 2013 Report Posted April 15, 2013 Just wondering did You get the right size? I see Woodcraft has a 12" x 12" and Rockler was !2" 1/4 X 12" 1/4 and a 14" x14". Also a quick Google search some people have used a plywood or MDF Plate to fit the saw and screwed the TS dust extraction fitting to the wood. Also a few made 100% from hvac ductwork and some made a wood hopper and attached a 4" dust port. Good luck Quote
Chuck Melton Posted April 15, 2013 Author Report Posted April 15, 2013 The saw I am using is from 1952 and doens't have fittings for a dust collection plate that I could see. The size is pretty right on for the base of the saw, I think I am just worried about a cube being too much volume for my little 1hp dust collector. I was starting to wonder if an inverted right triangle with the dust collection place being the slanted face would be better. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.