Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I guess I wasn't supposed to use the band saw that day

Featured Replies

Let me start by saying I have a 15 year old 14 Craftsman bandsaw. It was a gift and has actually served me really well. It can only take up to a ¾” blade, but it isn’t too bad at resawing anything under about 7” thick. The most amazing thing about it is how little drift I get. When it’s properly tuned, I get close to nothing at all. Which is why I always think it’s interesting when I see these special resawing fences. (Ah, but that’s a topic for another day.) Okay so I finally got to the point in my Roubo build where I needed to make some bench dogs. So, I set up the bandsaw with the ½” blade. (That’s the one I use most if not resawing or making sharp turns) I make a test cut, and shut the saw off… hmm… I shut the saw off… What the? … the saw isn’t shutting off. So, I unplugged it. With the saw unplugged I took the switch off, blew all the sawdust out of it, and reinstalled it. Yay, it works, saw goes on, saw goes off. Okay, so next I make another test cut… “CLANK!” Crap, I just broke my ½” blade. Well, that’s not the end of the world, it was in fact the original blade that came with the saw and I have an extra one. I get out the extra one and after a few minutes of pulling my hair out, I can’t figure out how come I can’t get this blade to run on the wheels right. I look at the box my blade came in… “Yep, ½” blade, 89-1/2” long.” Okay, what gives? Can you believe it? That’s not an 89-1/2” blade! It’s a 93” blade! Are you kidding me? I figured that was God’s way of telling me I shouldn’t use the bandsaw that day. So, I build up the gap stop instead. The next day I did return my blade to Sears, and got an 89-1/2” long ½” blade. Yay, it works fine. I’m back in business. What really surprised me was that the guy at Sears took the blade back with no questions, he didn’t even measure it. What’s more the SKU# was no longer in Sears’ system. The packaging has changed over the years. My blade was in a cardboard box, the way they come now is in molded clear plastic with a cardboard backer. I was actually quite surprised, because my experience with Sears is that they don’t always empower their employees to do something like that.

You're a lucky guy. They changed your band saw blade. Most of times, it is very hassle to return wrong items. So, how does the blade cut through the wood?

  • Author

The new blade is fine. I've been surprised again and again over the years at how well I've been able to get by with this really pretty low end bandsaw.

 

Ideally, I'd like to replace the entire saw, but I just haven't been able to pull the trigger. My dream machine is a Powermatic. There have been a couple times I've had the Grizzly webpage open and thinking about clicking the "add to my cart" button. Right now, I'm hopeful that the store near me which has a Steel City 16" industrial with a granite table on its show room floor will discount it way down since I'm pretty sure Steel City no longer makes that model.

Powermatic are really nice and solid saws.  I've heard bad review about Steel City band saws. But I like the resaw capacity of 50200 saw .

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.