EvilRick Posted December 18, 2013 Report Posted December 18, 2013 Picked up the new Porter Cable PCB375SS Scroll Saw this evening. Took about 10 minutes to assemble It's no louder than a sewing machine (I think it might actually be a sewing machine . . .) The work light and dust blower work quite well All the controls (tension, switches, table adjust, etc . . .) are right in front Quote
WolfmoonCT Posted December 23, 2013 Report Posted December 23, 2013 How is the vibration on it? Quote
EvilRick Posted December 23, 2013 Author Report Posted December 23, 2013 There doesn't seem to be much vibration at all. I used it this weekend for about 30 minutes or so and don't have anything negative to say about it. I did take the hold-down foot off as that seems to be the norm. It was in the way and wasn't aligned properly. The people that put it together had to of known because it was set to one side just so that it was centered on the blade. I was going to make a zero-clearance insert but from what I've seen, it's probably not necessary. A zero-clearance "overlay" makes more sense. Quote
EvilRick Posted January 2, 2014 Author Report Posted January 2, 2014 While cleaning up some dust I accidently fed the table insert to the dust collector. It has a very effecient impeller . . . I ended up just using some MDF and sanding till it was a snug fit and flush. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.