Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lacquer picks up color between coats

Featured Replies

Greetings all.  I'm somewhat experienced in small projects and traditional types of finishes and such, but am new to using powdered dyes and lacquer.  Right now I'm experimenting on a scrap piece of spruce just to see how things behave, and even now putting on the third coat of lacquer, the rag I'm wiping it on with is still picking up some of the color.  I don't see any difference on the work, so I'm more curious than concerned about it.

 

So here's what I've done:  I've found a line of powdered dye here in Japan where I'm living now that dissolves in denatured alcohol, and I'm quite pleased with this as it greatly reduces drying time for the color.  I've used a clean white linen rag to wipe on the color, and then the same method for wiping on the lacquer.  I expected some color to transfer into the rag on the first coat, but not when applying the third coat.  I've done a bunch of reading and watched some videos online about using lacquer and it just clicked that I was sanding between each coat (using 400 grit paper) which is unnecessary (old habit from using poly in the past), so maybe I'm just getting a bit of that dust in the rag.  The finish is still turning out quite nice with really strong color, as well as one can expect from spruce.

 

I'm going to be using the wood shop on the Marine base where I work, so there's no spray equipment that I'm aware of, and I honestly prefer to hand apply my finishes anyways as I feel more connected to my work that way.  My first project is going to be some flat zebra wood panels dyed blue to create some nice counter top for wire-frame shelving units (and am about to switch over and read the thread on zebra wood).  

 

Any and all advice or experience is welcome.

Thanks!

 

P.S. if anyone is interested, you can a gallery of some of my older work from many years ago here:

thenaturalcraft.4shared.com

post-15316-0-06715200-1394265662_thumb.j

Your always going to lift dye, there is no binder any re wetting will lift the color. You could just add binder but since your wiping the lacquer is coming to soften the previous coat and lift onto the rag. Your best bet is to find lacquer in a rattle can if you can't spray with conventional equipment. Once you get the dye sealed down you can move on to padding your lacquer as you normally would with a rag.

  • Author

The lacquer you are working with, is water-based?

 

-Ace- 

As far as I know, the lacquer is not water based.  The label is Japanese, so I can't read the details to be sure exactly what the liquids are.

  • Author

Your always going to lift dye, there is no binder any re wetting will lift the color. You could just add binder but since your wiping the lacquer is coming to soften the previous coat and lift onto the rag. Your best bet is to find lacquer in a rattle can if you can't spray with conventional equipment. Once you get the dye sealed down you can move on to padding your lacquer as you normally would with a rag.

Yeah, I had read about the melding of coats and that's one thing I like about working with lacquer.  It just surprised me that once I had two solid coats down there was still some color coming up.  However, lacquer is going on very thin with each coat and at least using my method seams that it will take many more coats than a urethane would to get a good solid finish.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.