Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I should have counted these doors before buying the house... Finishing 18 Slab Doors with HLVP

Featured Replies

Hello All,

 

Big fan of the site and the info came in handy when building a cedar patio table with hidden coolers last fall (it turned out well enough judging by the offers).

 

I purcahsed a foreclosed home a year ago and replacing the doors is my last reno project.  The old hollow core doors are in the trash and all of the new 2 panel solid core oak (vaneer) doors are fitted and ready for finish.

 

I have Kobalt HVLP guns (one gravity and one canister) that I would like to use for this project but I really need some assistance.  I have about 3 years of HVLP experience (body shop job during college) but I have never sprayed wood finish.

 

So here is the plan and a few questions....

 

1. Finish sand 3 or 4 doors at a time with 120 and then 220 (do I need to pick up a dual orbital or will a typical sander work)

 

2. I have modified some saw horses and predrilled holes for long lag bolts with a fitted metal sleeve to act like a rotisserie so i can finish coat the doors on both sides at the same time.

 

3. What would be the best stain to use?  I have used many minwax prodcuts in the past and plan on applying stain with cleaned rags, give it 5 minutes, then whipe off access once I have the stain color figured out.

 

4. Would a 4-6 hour dry period work before applying first topcoat?

 

5. Will the Kobalt I mentioned above work?  I am more comfortable with the gravity feed (experience) but do need to buy a new compressor.  Any hints on tank size and motor would be great.  I also plan to run a moisture filter and regulator.

 

6. What type of topcoat is the best for this set up? Lacquer, wb, etc?  Would lacquer dry the fastest?

 

7. Would 220 work great for a scratch coat between coats?  I plan on applying 2 solid coats.

 

I know this is a lot of informaiton but I thought this would be the best place to ask.  Thank you all in advnce for any advice you can offer.

 

Ben

Some great advice from Mike!  I would add some blotch control if you're going to stain.  The Charles Neil stuff is really good but, you could get away with just Benite on doors..

 

I found this out the hard way when I replaced the doors in my own house.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.