Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Painting plywood (WFC kids tables)

Featured Replies

I making a few sets of the WFC 2015 kids tables for some friends.  I went with box store oak plywood (instead of nice baltic birch) because in the past, they were relatively void free.  However, this batch must've been different because there's quite a few things I'll need to fill and cover up - voids on the edges, as well as chipped off top layers.  So, I'm thinking it's best to cover up the grain of the wood.  I was thinking of putting a thin coat of drywall spackle on all the parts (to fill all the little voids) and then spray with a latex primer before final painting.  However, I read elsewhere that latex paint will always feel "sticky"?

I received a Fuji Semi-Pro 2 for Christmas that I have yet to use and I'm dying to try.  Would spraying tinted lacquer obscure the grain of the wood enough, or would it require way too many coats?  If I go the lacquer route, would the spackle be a bad idea?  I also have a can of Old Master's pore filler that I could use.

If you're really just painting, try bondo instead, it fills voids and lasts far longer.  Drywall joint compound will crack and crumble when the ply moves and flexes.

I'd use a commercial pore filler.  It is designed for filling the grain of coarse woods like oak and sands easily.

There are many brands out there.  You can get Sher-Wood Natural Filler and Sherwinn Williams Stores.  Old Masters also makes a waterbased wood filler, around here it is stocked at Benjamin Moore paint stores.

With your fuji 2 stage, tinted lacquer, tinted shellac (Zinser BIN Shellac) or general finishes milk paint (which is just acrylic paint) would all shoot fine.  If using the shellac or milk paint I would top coat with a water based poly like GF high performance.  

  • Author

 

1 hour ago, Mike. said:

With your fuji 2 stage, tinted lacquer, tinted shellac (Zinser BIN Shellac) or general finishes milk paint (which is just acrylic paint) would all shoot fine.  If using the shellac or milk paint I would top coat with a water based poly like GF high performance.  

Hi Mike,

Will all those options be sufficient to cover the grain, or will the patchwork from the pore filler show through?

The pore filler will give you a smooth subtrate.   They key will be to sand it all evenly without sanding through the veneer.    Also keep your expectations in check. It likely will not be flawless.  

  • Author

Gotcha, I'll definitely give it a try on some scrap to see how it looks first.  Thanks!

+1 for bondo if any of the voids are very deep.  Sands well and hardens fast. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.