Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

FlexiPort hose to Dust Deputy

Featured Replies

I got a dust deputy for Christmas https://www.woodcraft.com/products/oneida-air-systems-diy-dust-deputy-cyclone-only and got a hose kit from Rockler https://www.rockler.com/dust-right-flexiport-power-tool-hose-kit-12-fixed-length. Both seem nice but I have no idea since I can't connect the two together.  The fitting for the hose (the all grey piece in the link pictures) if about 1/8" too small to fit on the dust deputy inlet.  Is there a larger fitting you can get from Rockler or Dust Right?  I can't seem to find any.  I'd rather not add an adapter but that's a possibility, but most convert from 4" to 2 1/2" or something similar. I'd be willing to carve out the fitting enough to fit it on, but I'm not sure it's solid plastic that I can cut into without breaking the piece apart.  

Anyone run into the same situation?

What I did with my dust deputy is I took one of these adapters:

https://www.rockler.com/rockler-2-1-2-to-2-1-4-conversion-port

And put it on the inlet port of the dust deputy.   I took some Gorilla tape and wrapped about 4 layers around the dust deputy port to make it a bit thicker, so I could clamp the rubber part of that conversion.   But this gives you a nice 2 1/4" standard vacuum hose input that most hoses will then connect into.

 

  • Author

That fitting is too small unfortunately.  I just had a chance to check it and the ID of the hose fitting is about 1.8" and the OD of the dust deputy inlet port is about 1.94". The OD of the fitting is just over 2 1/4" so maybe I could use it "backwards".  But the largest section of the dust deputy is just over 2 1/8" so it sounds like it'll need a lot of tape.  Maybe a 2 1/4" coupler would work, or this, depending on how flexible it is. https://www.rockler.com/dust-right-2-1-2-rubber-union-for-dust-collection

Though a 2" PVC pipe is actually 2 3/8" OD and 1 1/2" is 1 7/8" OD so a 2" or 1 1/2" to 2" PVC coupler should work and available at a big box store.  I think I'll just have to take both pieces in and try everything until I find something that works.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.