Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood Jointer Plane, Deal or Decoration?

Featured Replies

I found a Jointer plane for 29 dollars at a antique shop in my area. The material behind the blade is somewhat chipped out but not bad. the chips look like small 1/6in teeth. The iron dosent slide down to the mouth opening easily, there is some rust on the blade and the wood could use some cleaning. The wood before the mouth of the blade is smooth with a slight bow. Everything is there and i dont see any cracks or glaring issues.

I'm new to wooden planes and not sure what to look for. I thought for 29 dollars it would be low risk but at the end of the day 29 dollars is better kept in my pocket if this plane is better suited for a decoration. Any advise would be very welcomed.

Thanks!

is the blade at a very high angle? if so those actually might be teeth. it could a toothing plane. ONE use is for hammer veneering.

  • Author

Jwatson, Thanks for the idea. If thats the case then this plane would be a horrible buy for me. I think I am with Franklin pug, Ive got enough project tools and have a few other handtools want to make. I think i'll pass on this guy.

Thank you all for your input.

One clarification to Jwatson's post.

Toothed irons have more uses than veneering. I keep a jack set up with a toothed iron all the time and have never veneered anything.

The toothed iron is terrific for quickly leveling difficult, tearout-prone, stock. It's like the hand tool version of a helical jointer or planer head. You can plane in any direction, including across the grain and knots, with zero tearout. Once you're flat, you can finish with a high angle smoother or sandpaper.

thats one reason i just said it was one use i wasn't exactly sure what all uses they have, i thank you for adding more on that subject. ive never had a need in what i do with hand tools.

original poster i just noticed the title said its a jointer is it a longer plane? 28 inches or so? in that case it might not be a toothing plane. usually they look like coffin smoothers about 8 inches long with a high angle plane bedding. could be that someone put a toothing plane iron in a jointer. ive not seen one like this and i dont think its an appropriate match because i believe toothing planes to work properly have to have a high angle of bedding.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.