Recommended Posts

Posted

To lead off, I have the Bosch 1617EVSPK (plunge & fixed base kit, 1/4" & 1/2" collets)

I understand the importance of centering the base & am debating buying a centering cone but have a couple general questions first:

1) Is there any reason to buy the Bosch version over another type (say, DeWalt)? A tapered cone is a cone is a cone, right?

2) Does anyone have any shop-made solutions for centering the plate? I'd rather not buy a "uni-tasker".

3) Finally, seeing as Bosch uses proprietary bushings that are harder to come by (locally) than their PC-style counterparts, would you just get an aftermarket base? Something like: this from PeachTree or this from WoodCraft?

Thanks for any advice.

And, yes, Paralysis-by-Analysis is (one of) my downfalls...

Posted

1.) Absolutely... They all reference from the chuck, any will work.

2.) I center ONE router base to ONE motor, then I mark it. For 99% of your work centering is irrelevant.

3.) I picked up an aftermarket, PC bushing-compatible, 1617 base, and THAT became the subject of #2.

My centered base and plate has "centered" marked on it with a Sharpie, but I still check before I do things that are really important. In my experience, the only real need for absolute centering is dovetail jigs. Even there, you can keep the router face constant, and it matters far less if the bushing is centered, The same applies to dado or "jointing" edge guides. Don't rotate the router as you move. In the case of mortises, I hand fit my tenons, so a minor centering discrepancy never became an issue.

Adding this later ---->

For jigs where the outside of the router base runs against a straight edge, like shop made edge straightening guides, make a mark on the base where you ride against the fence. This makes it easy to not rotate the router.

Posted

I have the same router set. With regard to the bushings it was cheaper and less of a hassle to get the bushing plate and the adaptor that lets me use PC bushings. So that's another option for you.

Posted

It looks like the two bases you found are identical except the price, shipping and possibly tax.

Also, on the Amazon page under 'frequently bought together' there is a template guide adapter made by Bosch that adapts the PC templates to the base of your router. I have one of these and it works for me.

Mike

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 46 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined