Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finish questions/opinions.

Featured Replies

Hi All,

I have finished assembling the sides to the dog crate/side table creation my wife asked me to build. I have made it our of red oak. Mostly because I have worked with it before and it wasn't too expensive. I have two questions.

1) How would you finish it? I had build a gate out of red oak as well and used Minwax Polyshades. It turned out OK. I just remember it taking forever for the thing to dry between coats. Usually 2-3 days per coat if not longer.

I've watched all of Marc's videos about finishing and bought both the book and the dvd. I'm not super concerned that it matches what I did on the gate, I just want it to look nice. I was thinking just a few coats of Arm-R-Seal. What do you folks think? Should I bother staining it first? Will the red oak look good with just a varnish finish?

2) My side table has two sides that have panels and two sides that have slats for air flow underneath. I've already learned that I should have sanded and probably finished all of it before I started assembly. But all of the side are assembled separately. I thought I was going to be smart and not assemble the whole case until I had applied a finish to it. Well now I know for the next project to finish it before assembly.

How do you apply the finish to both sides? Do you do all of the coats on one side first, then the other side? To you flip it when the first coat dries? When do you do the ends and between the slats in my case? I have attached a image of the sketchup drawing so you can visualize what I am asking.

Thanks in advance for any and all comments.

Regards,

Scott

post-6552-0-19363000-1338186058_thumb.jp

There is no way to disassemble it again and do the finish? I only ask because the time and effort you took to build this will all be moot if the finish looks bad. And myself? I would disassemble it and finish. But that's me, there are other opinions on the way :) . Great sketch-up. Post when done?

  • Author

@Derwood I have glued up each side so I don't think I can disassemble it.

@Charles It's going to be indoors.

I guess my biggest question is what is the best technique for doing both sides. Take the top for instance. It is a solid piece. I'm going to route a slight cove in the bottom for decoration but other than that it is as it should be. Should I do all coats on the one side and the ends first then after they have dried flip it over and do the other side. I was thinking of doing the underside first that way if something get marked up sitting on the bench then it won't be seen.

What do you guys think about staining red oak? I've got a couple scraps I'm going to test one with stain one without but I wanted to get some opinions from folks with experience.

Thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.