Recommended Posts

Posted

Setting up knives is the bane of owning a jointer, we all know this, and some folks are better at it than others. I’m one of the latter. Last week I modified my Jet jj6cs 6” jointer to have a locking cutter head index. I know that many old jointers and some very nice jointers have such a feature, but a large number of us with a 6” jointer are left to fight it out with jigs, calipers, dial indicators and cut fingers in order to get our knives setup right. Well no more for me.

I removed my cutter head and after carefully located where to drill, I drilled a 1/8” hole through the bearing housing and into the cutter head at three precise locations in relation to each knife position. I can now insert a 1/8” pin into the cutter head locking it with each knife in turn at top dead center. No longer do I have to have one hand dedicated to rolling the cutter head back and forth to find the highest spot hoping that the cutter won’t roll out a little bit before I can tighten it up while checking with the dial indicator.

I set up my knives five times the day I did this mod just to check the process, and each time I was able to get 0.001” from end to end and from knife to knife. The only hang up is that I use a Jointer Pal jig and it does work great, but the knife with springs under it likes to raise the Jointer Pal. So I have a free hand now not having to attend to the cutter head position, I can now hold the Jointer Pal down firmly while I wrench on the knives. I did al three knives five times and each time I was able to do it in five minutes flat, and I never had to repeat an adjustment, and that’s not even trying to be fast.

This mod was very easy, but it does require paying very close attention to detail, and it took only a couple of hours. The tools required are a decent drill press, a 1/8” drill bit, some cutting oil, a 1/8” pin from Ace Hardware, and some plywood to make a simple jig.

Have a great day and thanks for reading.

Wayne

post-6376-0-56101200-1338338354_thumb.jp

post-6376-0-38218300-1338338359_thumb.jp

post-6376-0-70505800-1338338365_thumb.jp

post-6376-0-55058600-1338338374_thumb.jp

post-6376-0-97802100-1338338380_thumb.jp

post-6376-0-26255200-1338338407_thumb.jp

post-6376-0-28010300-1338338425_thumb.jp

post-6376-0-02145800-1338338432_thumb.jp

post-6376-0-32965900-1338338446_thumb.jp

post-6376-0-59604500-1338338452_thumb.jp

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined