Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lacquer on Varnish?

Featured Replies

Several wookworkers have told me it is ok to use a Varnish (oil/resin/solvent) for a basecoat (to give a sense of depth, etc.), and then use a spray lacquer as a top coat (perhaps 2 or 3 coats).

That seems risky due to the inherent differences in the two materials. I would think they would not work together.

Any insights?

Cheers,

If I understand the question correctly, first of all, solvent lacquer over "any" topcoat is a little dangerous in that the strong solvents might act as a stripper and cause wrinkling and etc, of the finish your going over.

If you want an oil look use a penetrating sealer like General Finishes Seal-a-Cell Clear or even a 1# cut of shellac and then solvent lacquer it.

That's my story and sticking to it ;)

  • Author

Don: Yes, I'm considering using all lacquer, but am also exploring other options that will provide, perhaps, even a deeper lookng fininsh.

Ace: I've never used shellac. When used with lacquer over it, would you expect it provide a deeper looking finish than just coats of lacquer?

Thanks, guys.

Cheers,

  • Author

Ace: I took a look at the General Finish "Seal-A-Cell Clear". I see it has urethanes in it. Doesn't that present the same potential incompatablity, i.e. that the solvent lacquer applied after the Seal-A-Cell" will cause wrinking, etc. of the GF coat?

Cheers,

Ace: I took a look at the General Finish "Seal-A-Cell Clear". I see it has urethanes in it. Doesn't that present the same potential incompatablity, i.e. that the solvent lacquer applied after the Seal-A-Cell" will cause wrinking, etc. of the GF coat?

Cheers,

Seal-A-Cell is a thin oil that soaks (penetrates) deep into the wood imparting an amber tone, hence no significant resin sitting on the surface to mingle with harsh lacquer solvents. Seal-A-Cell will begin to build after several coats depending on the type of wood. A thickening build up of finish is the danger.

Ace: I've never used shellac. When used with lacquer over it, would you expect it provide a deeper looking finish than just coats of lacquer? Yes, give it a try on a test board....remember an amber tone is warming things up.

Deeper and warmer are two different things. Personally I would not go out of my way to use two dissimilar finishes, with binders. Plain BLO is my first choice to slightly warm up the wood. For a more warming effect I would just use a little dye. Deeper is easier on darker woods but is also not hard on lighter woods. Deeper comes from elbow grease and a perfectly clear finish. To get that finish that looks like you can reach in and touch the woods surface you want contrast. No bleeding of the surface into the top coats. Shellac as sealer is not a good idea for this type of look because you are going from clear to translucent amber then wood.To warm and get the deep affect I'd just use a lacquer wiping stain, water clear vinyl sealer and cab acrylic giving the orbital sander a workout between building the finish and final polishing. Kelly moore makes a great water clear vinyl sealer and their cab acrylic builds easily, polishes perfectly.

Don

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.