Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

general finishes arm r seal and seal a cell.

Featured Replies

I have built a cherry bathroom cabinet that is a cherry plywood case with solid cherry face frame and doors. I will be using an oil based stain and then following with one of general finishes top coats, or both. I am unsure as to whether I need to use seal a cell first before the stain, or seal a cell after the stain followed by arm r seal. Or if I can just use the stain and follow with several coats of arm r seal. Thanks for your help with this question.

You can leave out the Seal-a-Cell all together. It is a redundant product in my opinion. So I would suggest staining first, then following up with coats of Arm-R-Seal. You also might consider doing some tests on scrap as you might have some blotching to contend with on the cherry. For that, I'd recommend Charles Neil's blotch control. That's a pre-treatment that goes on before the stain.

  • Author

Thank you very much for the advice. I remember you mentioning Charles Neil's blotch control on wood talk online. I had also submitted this question to general finish via email and they recommended using the seal a cell and then applying the stain while the seal a cell was still wet. That sounded a little risky to me. I appreciate your advice and I think I will skip the seal a cell as you recommend. Thanks again. I really appreciate all that you do for the woodworking community.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.