Pbmaster11 Posted July 7, 2012 Report Share Posted July 7, 2012 As you see in the pictures, I have incorporated a down draft section in my out feed table. In addition, I used 3/4" holes so I can use bench dogs, wonder pups, and hold downs. I attach the handle for my floor sweep from my dust collector and plug it in. Great for cleaning off the top of the table as well. Each hole has a small chamfer... I have to do a few in the middle but didn't want to lose velocity by having to many holes. Quote Link to comment Share on other sites More sharing options...
mds2 Posted July 7, 2012 Report Share Posted July 7, 2012 Very cool. How well does it work? Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted July 7, 2012 Author Report Share Posted July 7, 2012 Very cool. How well does it work? It works pretty good, the chips from the holes are quite a bit after drilling all of them. I plugged in the DC and let it rip...pushed them through and would grab... I would like a little more draft and grabbing power but those were big chips... dust from sanding will be grabbed no problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.