Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Experience with Chair-Loc to tighten loose tenons?

Featured Replies

A friend has asked me to fix up an old Hitchcock chair of his - not one of the very old collectibles, one from the mid-1900s factory production. I'll be redoing the seat and upholstery, but there are also several loose mortise and tenons on the bottom stretchers that could use some attention.

They really are not that bad (especially in the humidity of my shop :)), but there is a slight wiggle to the chair when seated. This is only in three or so joints. All others appear pretty solid to me. I would much rather fix the ones that need without touching the others. Disassembling the whole chair to fix a handful of joints doesn't seem to make sense, but I can't clean the old glue and reglue without doing this.

I just heard about "Chair-Loc" - which claims to tighten loose joints by swelling the wood of the tenons. http://www.westernwooddoctor.com/chairloc.htm

I'm curious if any of you have had any luck with this product or if you have any other suggestions about different approaches to fixing this issue in old chairs.

Thanks for any thoughts.

I've never heard of it but I would be interested in hearing about it also. I wonder what they would inject that "swells the wood permanently" and "doesn't dry out".

I've used a product called Swell & Lock on Windsor chairs I inherited from a family member who was 5' tall and 5' wide. Her weight popped some joints apart and loosened others. I put the stuff on and it worked. It swells the fibers then hardens them which tightens the fit of the tenon in the mortise. Someone had even tried to re-glue the joints with yellow glue and, after I scraped the heavy stuff off, it worked on those joints too.

  • 2 weeks later...
  • Author

Thanks for the replies. Good to know someone's had some success with this kind of thing in the past, JayWC. I searched for Swell & Lock locally with no luck - despite the DAP site pointing me to several local stores. The only thing the local stores had were specialized glues - not what I wanted. Oh well.

I wound up ordering what sounds like a similar product, Swel-Loc. (Made by Behlen.) Will post again once I've given it a try.

Will post again once I've given it a try.

Good luck!!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.