Pbmaster11 Posted November 5, 2012 Report Share Posted November 5, 2012 This is the first post of hopefully many! Just purchased the following: RT2436OS 24" x 36" Offset Router Table Top [Plate option:Without Plate] INCRA Mast-R-Lift II INCRA Mast-R-Lift II Router Lift [Options:Without router] LS17WFNCSYS INCRA LS Super System - 17" & 430mm Range [Options:1/32” Imperial Scales] I have yet to come up with a design of the router table, so, I am open to any and all suggestions at this point! Pictures, links, or any other way of helping me put together your suggestions would be greatly appreciated. I have seen multiple designs and features that I like, I have listed them below... I like the dust collection port setup on this oneI like the template storage on this one. Ultimately a large drawer to store the template storage board.I would like to have in the design a clear view (plexi glass) of the router cubby with holes for air flow (dust collection)Drawer for bitsDrawer for tools and table accessoriesDrawer for other hand held routers and accessories.I would like the table to be mobile. 4 casters (2 locking) Any tips, tricks, and suggestions for a fellow WTO'er and woodworker? Quote Link to comment Share on other sites More sharing options...
tim0625 Posted November 9, 2012 Report Share Posted November 9, 2012 I have an Incra system. My hinney tightened over the price but having used it for a year, it has met and far exceeded my hopes as a TS fence. Watch Mark Mueller's videos on YouTube - it all works exactly as he demos it. When I bought a Grizzly 5hp saw, I never installed the Shop Fox fence. It's that good. You'll never regret purchasing that. I also bought the same thing - Master Lift 2 and 24x36" table. I have a Makita RF1101 router with the soft start. It's all been great so far. Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted November 26, 2012 Author Report Share Posted November 26, 2012 I finally had time to upload pictures of the assembled fence system and table. The router lift is ready to go out of the box. I have a couple of projects to get out of the way before I get started on the casework. Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted December 6, 2012 Author Report Share Posted December 6, 2012 update on the router table base. Quote Link to comment Share on other sites More sharing options...
tim0625 Posted December 6, 2012 Report Share Posted December 6, 2012 I have the same system. Wouldn't trade it! Your case is coming along! Christmas present to you!! Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Here are pictures of the white ash edge banding, and weather stripping dado for the top of the router table.seal Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted December 12, 2012 Author Report Share Posted December 12, 2012 Completed the drawers (material is different because I ran out of the maple ply... I just used some left of shop stuff)... installed. and a picture of some storage 1 Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted December 17, 2012 Author Report Share Posted December 17, 2012 another update Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted January 11, 2013 Author Report Share Posted January 11, 2013 It is done! Quote Link to comment Share on other sites More sharing options...
Eric. Posted January 11, 2013 Report Share Posted January 11, 2013 Looks good! How's the DC? Quote Link to comment Share on other sites More sharing options...
Pbmaster11 Posted January 11, 2013 Author Report Share Posted January 11, 2013 I have not used it yet! I will report back when i do! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.