Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Super sturdy exterior doors

Featured Replies

I have been thinking about this for a long time. Many approaches for the stiles and rails are lamination, some say, just use 8/4 and go for it.

Yesterday I saw a new approach (for me). This approach involves lamination like creating a cutting board.

I like this approach because the stiles would move a lot less and this approach will allow me to finally get me a bandsaw

My concern is about making sure the final veneer on stiles and rails will stick and stay glued forever. They recommend 3/16" thick ... why not 1/4"?

Here is the article

http://americanwoodworker.com/blogs/projects/archive/2012/02/21/ws-build-your-own-french-doors.aspx

They recommend 3/16" thick ... why not 1/4"?

This is a quote from the article where they talk about the veneer thickness:

I cut my veneer just over 3/16" thick. Using 4/4 lumber, you’ll get three pieces of veneer from each board.

Sounds like they were just trying to use the material efficiently. Depending on how thick your "4/4" lumber was to start with, you might only get two slices if you were making them 1/4" thick.

-- Russ

  • Author

I mostly buy 5/4" because the waste is the same as 4/4 and I get more options. My cabinet doors for my home are all 1-1/16" thick ... I like them strong, different feel.

When I get into finer stuff probably I will end up using 4/4, until I get my bandsaw ... then go back thicker so I can bookmatch.

This is a quote from the article where they talk about the veneer thickness:

Sounds like they were just trying to use the material efficiently. Depending on how thick your "4/4" lumber was to start with, you might only get two slices if you were making them 1/4" thick.

-- Russ

This is a quote from the article where they talk about the veneer thickness:

Sounds like they were just trying to use the material efficiently. Depending on how thick your "4/4" lumber was to start with, you might only get two slices if you were making them 1/4" thick.

-- Russ

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.