Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Using silicone in the shop, mats that is

Featured Replies

I have been interested in using a silicone mat that is normally used for baking, in the shop. Bought an inexpensive one about 6 weeks ago and find it very useful. Best I can tell, no finish or chemicals we use in the shop, affect it any way. Wood glue just peels off, so does hot melt glue and epoxy. The epoxy leaves a residue but that wipes off with lacquer thinner. Poly, stains, wood filler all just peel or flake off.

Now I plan to get a larger one and use for most of my glue ups. Also need to look for a vary small bowl or cup for mixing epoxy or finish in. Just let it dry and then pop it out. Great stuff.

Downside to this is it can't be glued to anything, clamping is the only way to keep it from moving around.

--BRuce

A piece of painters plastic does the same thing and, costs only pennies. I have some pieces of 4mil plastic I use one to cover my bench a couple strips of tape no glue on the bench just wait for the glue to dry pops right off, I have a piece of plastic to put on the floor that goes under my sawhorse so no glue sticks to my shop floor and a couple small stips of plastic to cover the tops of the horses to keep them clean. I've been useing the same pieces of plastic for years if they ever wear out or get damaged I have the rest of the roll of 4mil just waiting in the wings. A roll of 10'x25' 4 mil plastic at HD about $9, no glue on the bench priceless.

  • Author

That's a good idea, I tried that a long time ago but couldn't get it to stay put or stay flay. Taping it down maybe the trick. I will certainly use that to cover the bench during large glue ups.

--BRuce

It's hard to beat just plain old formica, cleans up easily and nearly indestructible. For mixing, real mixing cups are cheap and of course WB can just be rinsed out. For me pouring finish out of cans is where I always make a mess. Mixing lids pretty much eliminate this problem.

I use a cheap, double-sided melamine sheet that covers my bench for glue-ups.  My current one is over five years old.  My outfeed tables are Formica covered.

 

When mixing finishes, I use newspaper, expired aviation charts, or if I'm out of those, brown paper off a roll.  I don't pour finishes, I dip it, using plastic or metal measuring cups, depending on solvent.

 

I like to mix epoxy in cheap graduated medicine cups.  I paid less than $.02/ea for my last box:

http://www.officedepot.com/a/products/849838/Calibrated-Plastic-Medicine-Cups-1-Fl/

 

What's nice about the cups is that you can pick a measurement scale that is easy to proportion based on your needs.

  • Author

Barry, what brand and container type do you use for epoxy? I've tried several types of dispensing methods but haven't found one I really like. The best one so far has been two squeeze bottles but even there, the hardener is starting to thicken.

I use the cups also, bought 500 several years ago. We use them for everything from craft paints to medicine and there seems to be as many as when we started. Never used them for epoxy though, time to give that a try too.

BRuce

For epoxy use a small zip lock bag. Squeeze both parts into a corner, mix by squeezing bag, cut off corner to dispense throw it away when done. Less waste and no mess.

These days, I buy my epoxy in smaller bottles that get 50/50 mixed, as I don't build airplanes anymore.  I just store it in the bottles.  When I mix, I add the more liquid component to the cup first, then the thicker.  The liquid will level at a volume marking.  I simply add the other to the proper total level, as it will displace the liquid.

 

By adding the liquid first, you can get an accurate volume measurement.  If you add the jelly first, it won't level, possibly causing inaccurate mixtures.

 

When I used to use larger volumes of products that didn't mix 50/50, I usually used Don's idea of the Ziploc bag.   That's a cheap, easy and effective way to mix the components.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.