Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

In a bind. Need fast-drying finish help

Featured Replies

Hi everyone. New Here.

 

I just took on a project of finishing some cigar boxes tha I had purchased for my groomsmen and I have only 2 days to finish. I started off by staining them with Cabot red mahogany woodstain and wanted to put a topcoat of some type on BUT...

 

...As some projects go, I didn't get the time to do the research on what type of topcoat I wanted to put on so my questions to you are?

 

Is there a quick drying topcoat (varnish, shellac, etc) that I can use that will still look decent?

Would something like BLO, danish oil or something suffice?

I attached a picture that I hope you can use to help me out

 

Thanks!

 

post-13795-0-28674200-1365000324_thumb.j

I wouldn't use varnish on a cigar box or anything else that will stink for a long time.  Shellac would be the best choice for you, IMO.  BLO or tung would cure relatively unsmelly, too, but it'll take a while to cure.  Shellac.  Goes on fast, no stink.  And maybe consider not finishing the inside at all.

  • Author

I wouldn't use varnish on a cigar box or anything else that will stink for a long time.  Shellac would be the best choice for you, IMO.  BLO or tung would cure relatively unsmelly, too, but it'll take a while to cure.  Shellac.  Goes on fast, no stink.  And maybe consider not finishing the inside at all.

 

My thoughts were to leave the inside unfinished too. I'm going to be putting some gifts inside as well so I wanted to make sure they a) didnt stink and b ) didn't get affected by the finish.

 

Will the Shellac leave a really glossy finish or is it fairly dull, like a satin.

Blo and tung take days to dry, tung is fowl smelling. Shellac is whimpy but will dry quick and look good on the short term. Solvent lacquer will be dry in 20 minutes at 70 degrees. WB poly acrylic takes about 2 hrs at 70 degrees. Use a box fan to air force dry WB in 20 minutes.

Speed finishing :)

My thoughts were to leave the inside unfinished too. I'm going to be putting some gifts inside as well so I wanted to make sure they a) didnt stink and B) didn't get affected by the finish.

 

Will the Shellac leave a really glossy finish or is it fairly dull, like a satin.

 

Shellac will get glossier the more coats you add and the more you polish.  Put on a few coats sanding between, and stop when you like the sheen.

 

Or you can speed lacquer like Don suggests.  I just personally like putting a natural finish on anything that will contain something I'm going to consume...or smoke, in this case.

  • Author

I just personally like putting a natural finish on anything that will contain something I'm going to consume... or smoke, in this case.

 

I hear what you are putting out, Eric. They are actually going to contain a wetshaving kit - Double-Edge razor and razors, shaving brush, a puck of soap and a soap holder.

Well, I'll make the run to the hardware store and get some shellac to finish it and call it good. Like I said earlier, I bought the boxes and they. are. cheap. Took a long time to sand down the excess/spilled glue from the factory and they sanded it against the grain so that had to come out too.

 

Last question. Do I need to grab some 400 to sand in between coats, or is that just an option?

 

Thanks for the help guys!

Just make sure your buddies know not to put anything containing alcohol in them if you're using shellac...i.e. aftershave, etc.  It'll melt your finish off. :)

  • Author

Good thinking! Majority of aftershaves contain alcohol, so that could be a potential problem.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.