Brendan Clark Posted April 9, 2013 Report Posted April 9, 2013 I'm looking at buying an old 3hp Powermatic shaper for $1100. I've also been looking around online and saw a Grizzley shaper new for $1200. Any advice if I should go with the old Powermatic or get a new Grizzley? Quote
dwacker Posted April 9, 2013 Report Posted April 9, 2013 Depends on the fence if the pm has the fence then go with the pm. Grizzly shaper fences are boat anchors. How old is the pm? Is it drilled for feeder? Does it come with both 3/4 and 1 1/4 spindles and spacers? Quote
Brendan Clark Posted April 9, 2013 Author Report Posted April 9, 2013 It does have the fence both spindles and is drilled for a power feeder. I don't remember seeing any spacers though. It was the last model they made in the USA before moving production to china. Quote
pghmyn Posted April 9, 2013 Report Posted April 9, 2013 I would say go with the PM. Sounds like a deal if in good condition. Quote
dwacker Posted April 9, 2013 Report Posted April 9, 2013 It does have the fence both spindles and is drilled for a power feeder. I don't remember seeing any spacers though. It was the last model they made in the USA before moving production to china. Spacers are cheap. No big deal if you have to go buy them. Even with a new machine you will end up buying different sizes anyways. Being drilled for the power feeder is good, you will at least want a small one for running a back fence and climb cutting. If the machine is out of a production shop Id be a little worried and go with the griz. You can just use a plywood scrap as a fence and have a better fence than they supply from the factory. If it was just a home owner Id go with the pm. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.