Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

help.....trying to patch veneer on table top

Featured Replies

I'm trying to fix a small section of table top where veneer chipped off. I tried using an oversized section of veneer taped over damaged area. I taped it over the area and cut out a patch with a very sharp razor knife. I glued and clamped patch into area. After dry I lightly sanded and stained. The edges of the patch are very noticeable where it crosses grain. I cut a very tight patch but still couldn't hide it. So I tried sanding a little more and went through the veneer. Any tip on how to fix this would be great. What's the trick to this?

post-13960-0-24383100-1367460122_thumb.j

  • Author

Thanks master poster. I'll give it a try. Are my expectations too high to assume that the final patch should be invisable? The table has a distressed look for an "old barn" look. If it can't be invisible, do you know of something I could put over this area to give it a slight rustic appreance instead of a patch? I was thinking of something like a bow tie type of patch that is used to reinforce a split or crack (may be a little too rustic though). I'm just fishing for some ideas here?

 

Thanks

Id probably use a router and template. You can get a inlay set at rockler. Pick up a square of material while your at to so you have lots of wood to choose from. Matching the grain is the hard part. You want it to look rustic make a fake knot with end grain. :)

  • Author

I actually went a different route. I tried another patch which was much better but I could still see it. I ended up cutting it out and rejoining the table. Its two inches shorter but looks great.

post-13960-0-94557500-1367596501_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.