Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bleeding Stain

Featured Replies

I'm building a coffee table and end tables out of weathered oak. I sanded, vacuumed the project off and wiped it down with tack cloth. Now the stain I used was Minwax, oil based stain, natural finish. After staining and wiping the project down, an hour later the stain was like bleeding out of the pores of the wood. And it continued to do this for 48 hours after staining. I continued to try and buff these bleeding areas. But in a few spots where it bled out, the stain dried and it can't be buffed or wiped off.

Any thoughts or ideas on why this happened? And what to maybe do about it? Any help would be much appreciated. I'll be using SW pre-cat lacquer.

Sincerely Dan

Hey Dan, oak is a very open-pored wood, so the stain weeping back out of the pores is par for the course.  You have to keep wiping back the sweat for some time.  You can hit it with another coat of stain, and that might reconstitute those little dried stain boogers so they'll blend back in.  Or take a rag lightly dampened with mineral spirits and wipe the whole table down with that.  It'll pull up some stain and may look streaky...so try to wipe as uniformly as possible and then do a second coat of stain...and be sure to keep wiping and wiping to prevent it from happening again.

 

P.S.  Welcome to the forum, but you may want to consider changing your avatar...the subject of politics is not allowed here, and for good reason.  Just woodworking.  :)

  • Author

Eric, thank you very much! I've done a lot of work with oak in the last 30 years. But this was a first for me. Now this oak had been stored improperly in a Quonset, semi exposed to the elements. So I suppose that has something to do with this issue.

And thanks for the welcome! Avatar is changed. I was in no way trying to bring politics here. I fully understand the just woodworking.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.