Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Aftermarket Shaper fence

Featured Replies

Does anyone know if there is a good aftermarket fence for shapers?  I am starting to make cabinet doors in house more and more and am in the process of fine tuning my set-up.

thanks,
Dustin

1) Stack plywood glued together the height of your cutters. Push the stack into the cutter heads using the miter slot or coping sled. Bolt or clamp to the table. The is will give you a full zero clearance fence for each cutter head profile.

 

2) Face your existing split fence all the way across with plywood clearances for each cutter head same results as above.

 

 

3) Use full cutters and a back fence (plywood strip). This will cut the profile and cut the stile or rail to final width at the same time.

 

4) If you dont have full cutters use a back fence set to the cutter depth. Use the miter slot as an indexing point for each cutter head.

 

Obviously 1 & 2 are for hand feeding and 2 & 3 are for power fed stock. With 2 & 3 you can climb cut for cleanest possible cuts.

D,

 

Forgive me if I get this wrong but a shaper to you is a spindle moulder to me? If this is the case we fitted these to 2 of our 4 spindle moulders. Although the initial purchase price was high this was soon offset by the dramatic reduction in set up time (on that journey to SMED) and also a very safe method of working.

We do also use a false fence (see video to illustrate what I call a false fence) which is broken through when we encounter a situation which the aigner fence can't cope (this does not happen often) 

D,

 

Forgive me if I get this wrong but a shaper to you is a spindle moulder to me? If this is the case we fitted these to 2 of our 4 spindle moulders. Although the initial purchase price was high this was soon offset by the dramatic reduction in set up time (on that journey to SMED) and also a very safe method of working.

We do also use a false fence (see video to illustrate what I call a false fence) which is broken through when we encounter a situation which the aigner fence can't cope (this does not happen often) 

 

Aligner fences were popular years ago. They fell out of popularity as quick as they came in when guys figured out a free scrap that they have always used in the past would do the same . For cabinet doors preset back fences, climb cutting is faster, cuts cleaner and eliminates the need for reduced clearance fences. You can run door stick cuts at 108fpm easily if you think your fast enough to keep up or have to guys one feeding and one stacking. :)

I guess it depends on what you do, we have a lot of variation due to the very bespoke nature of our work with frequent tool changes needed. For us the illusion of cheap scrap turns into paying guys to screw and unscrew false fences, cutting out false fences, a pile of false fences that need to be stored, hairy breaking through etc. Aigner gets rid of that for us and repaid our investment quickly and made using the machine safer. That being said, if its just one or two of you in the shop and or you only have a few setups a false fence would be a perfect solution. ;)

I guess it depends on what you do, we have a lot of variation due to the very bespoke nature of our work with frequent tool changes needed. For us the illusion of cheap scrap turns into paying guys to screw and unscrew false fences, cutting out false fences, a pile of false fences that need to be stored, hairy breaking through etc. Aigner gets rid of that for us and repaid our investment quickly and made using the machine safer. That being said, if its just one or two of you in the shop and or you only have a few setups a false fence would be a perfect solution. ;)

 

We are just to cheap to spend $1000 US Dollars on a fence face. :) 

  • Author

Thanks for your input G S and Don.  I defiantly like the idea of making a wood fence and the back fence idea with power feeder seems like the best option.  My jet shaper's fence leaves something to be desired and I was looking at getting a grizzly shaper (even though I dont really like grizzly) and I know they don't have the best fences.  it may be worth the money to get a better shaper.  I wish I just had the $20grand to drop on a unique door machine.  Then I would be in business.
thanks again,

Dustin

Thanks for your input G S and Don.  I defiantly like the idea of making a wood fence and the back fence idea with power feeder seems like the best option.  My jet shaper's fence leaves something to be desired and I was looking at getting a grizzly shaper (even though I dont really like grizzly) and I know they don't have the best fences.  it may be worth the money to get a better shaper.  I wish I just had the $20grand to drop on a unique door machine.  Then I would be in business.

thanks again,

Dustin

 

The nice thing about the about Grizzly Shapers is the fence doubles as a boat anchor. Although its worthless for a fence you can use it for something. :)

  • Author

So we are on the same page ;).  Cant complain about a new anchor for the fishing boat!  Other than that hopefully the hole machine is not a boat anchor. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.