Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Hope chest for new baby--looking for advice

Featured Replies

Hi all,

 

I'm brand new to the forum so please be gentle. I really like mid-century furniture and was able to pick up a gem off Craigslist for $40. It's an old hope chest, and my wife and I are going to use the top surface as a changing table for our first child, due in a few months. The inside will get filled up with toys or other baby-related paraphernalia.

 

Anyhow, it needs some refinishing work so I was hoping you all could give me some advice. Photos here (no spam): http://imgur.com/a/Sowiq#0

 

The top surface is pretty scrached, and there's one area where the top layer of wood has really worn away. The inside of the chest appears to be cedar-lined and is in great shape.

 

I guessing it needs to be sanded thoroughly but I'm not sure what the best next steps would be. 

 

Any advice is much appreciated. Thank you.

 

--integrity

I'm sure the Pros will reply soon. But to get you started. The Wood Whisperer (Marc) has 6 videos on refinishing and a book.

 

Are planning to repair and refinish (keep original) or 100% remove all finish and maybe a new color with top coat (start over)? The top looks like You will have to start over.  I would guess You would like a durable finish (top coat) to withstand fun baby stuff like Baby oil, wet ones, water, etc. ?

It doesn't look like there is much finish on here though. Sand sanding at 80 grit to remove the deep scratches. If you've got a cabinet or paint scraper even better. Move up to 100,120,150 and 180. If this is proven to be difficult get some stripper and gloves.

Now are you planning to stain or colourize the chest? I've understood that any finish is safe after it has dried and cured. Not everyone agrees though. :P

  • Author

Thanks for your replies. Doug, on your recommendation I started watching Marc's videos. After watching the first 2, I think I might have a bit of a problem. I went back to take a much closer look at the piece, and I'm pretty damn sure that the light wood color is veneer, at least in SOME places. I took a few more pictures using the macro function on my camera to get in close. Please take a look.

 

Here it looks like the top surface has almost been rubbed away: http://imgur.com/a/4wi5L#10

Cracking in "layers" on the edges: http://imgur.com/a/4wi5L#11

X-section right underneath the lid, you can see the darker veneer layer on the right side: http://imgur.com/a/4wi5L#16

Joinery around the lid corner, seems like you can see the veneer layer around the outside of the cedar: http://imgur.com/a/4wi5L#14

 

I have no experience whatsoever analyzing this sort of this, but it looks rather veneer-ish to me. What do you think are the right steps? Ultimately, I would like to keep the color similar. I agree that whatever we put on there needs to be durable to take care of baby stuff. At the end of the day, it doesn't have to be perfect, but I would like it to be smooth and not dangerous to the touch. Also will probably need to do a lead test as Marc recommends especially since this will be near a baby.

 

Thanks all.

--integrity

Neat old Lane. Dont go at it with a sander you might go through the veneer. Strip it carefully. You might as well call lane and see if you can get a new lock for free. They were recalled and should not be used with kids. Tell them you got it from a parent. If the veneer is chipped out and you want to fix, look In the lock mortice and see if its particle board. Most Lanes were PB and the veneer was unusually thin for the time period. Most finishes are safe when cured, there are some like conversion varnish that are not but typicle off the shelf WB finishes are fine.

  • Author

Great advice, thanks Particle. A little internet searching turned up this site: http://www.lanefurniture.com/CustomerService/Lock-Replacement.aspx

Others may also be interested in the lock recall. It looks like they will indeed send a new one for free, and the website tells a little bit of the story behind it.

Yes, the veneer is particle board.

 

So overall, what is your recommendation? As I understand so far, it would be (1) strip, (2) sand, (3) stain?

 

Unlike refinishing a table top, I need to do the surfaces all over this piece. Any recommendations on how to handle the vertical sides?

 

Thanks again,

--integrity

NO DON"T sand at all. What I think PB is saying, is the veneer can be very thin, as thin as 1/64 of a inch max about a 1/16. Sanding will make a bigger hole (worn away area) in the veneer. 

 

PB if You could reply.

not sure about this part " there are some like conversion varnish that are not but typicle off the shelf WB finishes are fine." I think What i think He is saying is don't use WB finishes (WB=water base finish) on veneer, the glue holding down the veneer may not be waterproof glue.

 

A good and safe but slower wood stripper is "Soy-gel remover"

 

O also I was thinking maybe a Glass top, then no hard work/repair needed.

 

Good Luck

NO DON"T sand at all. What I think PB is saying, is the veneer can be very thin, as thin as 1/64 of a inch. Sanding will make a bigger hole (worn away area) in the veneer. 

 

PB if You could reply.

not sure about this part " there are some like conversion varnish that are not but typicle off the shelf WB finishes are fine." I think What He is saying is don't use WB finishes (WB=water base finish) on veneer, the glue holding down the veneer may not be waterproof glue.

 

A good and safe but slower work stripper is "Soy-gel remover"

 

O also I was thinking maybe a Glass top, then no hard work/repair needed.

 

Good Luck

 

Irregardless after stripping a light sanding is needed. WB is fine. Fixing the veneer is really not all that hard but you have to be patient and find some matching veneer at someplace like rockler. I would just go at it slowly with a stripper and see what you end up with. The Lane chest had thinner than average veneers so just use common sense and be careful. Be sure to order that new lock.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.