Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Good Finish for "Treads"

Featured Replies

I'm building a "Little Helper Tower" for my daughters (ages 3 and 6 mo). The "tread" or platform is walnut (see attached pic).

 

I'm looking for a durable finish but not something too slick since my girls will be standing on this for years to come.

 

I was thinking of sanding to about 150 and then just hitting it with a few coats of Arm-R-Seal but not going for a super slick surface like I normally do. If this was a table top I might go to 320 and then use a Festool Platin and rub some mineral oil on it after the first few coats.

 

Any thoughts on if that's a good approach or if there is something else I should try?

 

Thanks,

Shawn

post-90-0-45520400-1374346551_thumb.jpg

One thing I've heard of (haven't tried it yet, but I'm getting close) is to mix a little grit into your finish when you apply either the top coat or the coat just before that.  (Obviously that makes sanding difficult.)  It doesn't have to be a large particle, either, or high quantities.  Just a little "grip" should be sufficient.

 

(Then again, I'm a fan of carpet tacked on stairs... because sliding down them is much more fun on carpet than wood.  May not look better, but it's great for hours of enjoyment at a relative's house.  never your own, of course, because the parent types don't like it.  Mine yelled at me just last month for doing that.)

 

Your other option (as I see it) is to use the walnut panels, just cut them into diagonal strips and re-laminate them together.  When you do that, just stagger the strips slightly so that they are not flush (to create a grip surface).  This is contrary to what we normally do, so spacers are probably not a bad idea.

I think your idea of just a couple coats of Arm-R-Seal would work just fine.

We have a little stander similar to what you're building (we bought it, I didn't have the time to build one and for the price used, it was cheaper than the materials would have been) and it's a fairly smooth surface.  Truth be told, most likely the little one will be barefoot which will provide all the traction they'll need :).

 

One suggestion I would like to mention just looking at our version of the helper would be to increase the footprint of the sides where they would be climbing up for stability.  As they're climbing the added weight outside of the footprint of the base could be a little bit of a tipping issue.  I know as my little girl started to get more adventurous the added stability was needed (although she is a bit of a monkey!)..

 

What you've done looks great!

  • Author

Thanks for the input guys. I think I'll stop at 150 and hit it with some ARM-R-SEAL. We'll see where that gets me.

 

Boatworks, I have some stabilizer additions if things get tippy. I didn't like the way they looked so I figured I'd try it one way and then add the stabilizers on if the girls get "monkey" ish. Haha.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.