Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Spar varnish streak problems

Featured Replies

Hey everyone

I'm finishing a few outdoor chairs with "Man of War" spar varnish.

I started with thin coats and incrementally increased the varnish to achieve a better built up.

On my last coat I ended up with streaks & splotches.

How can I fix it? I'd like the finish to look even. I don't really want to start over if possible.

Here is the process I used:

All coats were wiped on.

Coat 1- 1:1 spar varnish & mineral spirits

Coat 2- 1:1 spar varnish & mineral spirits

Coat 3- 2:1 spar varnish & mineral spirits

Coat 4- 3:1 spar varnish & mineral spirits

Any help would be greatly appreciated.

Is it raw wood or a painted surface?

 

My guess is from thinning the product. You should apply straight from the can. The mineral spirits is trying to gas off through the finish causing issues. You should let the chairs dry out good. Longer the better. Give everything a good scuff sanding and re-apply full strength.

 

 

 

-Ace-

Hey Zig,

 

Are you able to post a couple pics?  I'm guessing that the coats were simply applied too thin and as the solvent evaporated there wasn't much of a film left.  Try giving a light sanding with 320 - 400 and brushing the coats on..  A foam brush works pretty well; but a badger brush works best..

  • Author

Thanks!

Here is more info

I applied it over the raw wood (red cedar)

I scuff sanded between each coat, 320 grit

Each coat had minimum 1 week to dry

The first 3 coats looked great, nice & even.

I cut it so I didn't have to use a brush (I was trying to avoid brush streaks, looks like it back fired on me)

Brushing is actually quite easy.  I haven't used that particular product, but generally speaking I use the material straight out of the can (no thinning) unless there is a breeze and the solvents are evaporating before it can flow and level out.  One of the big tricks when brushing is NOT to overwork the material.  Everytime it is pushed around with the brush it allows the solvents to evaporate faster. 

 

With a foam brush it's very easy to apply the varnish too thin, although they do lay down a nice even (thin) coat..  The goal is to apply it fairly thick, but not so thick that it sags, runs or pools..  Kind of hard to describe, but a little practice and you'll get the feel for it.  A good badger style brush works very well in this sense as it holds enough material that it's difficult to get dry streaks.  You can use medium pressure on each stroke and it lays the material down pretty evenly.

 

It's fairly common to have air bubbles after the first couple of swipes, but as the material flows out the bubbles break and level out.  I'd guess that I don't work the material any more than 3-4 brush strokes.  Beyond that, I leave the varnish to work as it's supposed to.  If you're having trouble getting the results, I'd suggest trying Pettit 1015 or 2015.  It's what I use and am very happy with the working properties.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.