Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My favorite mission recipe - how would you modify to waterborne?

Featured Replies

This has been my go to mission recipe for many years. I'll modify the dye and/or stain to change the color but it's always the same steps. I got a Fuji Mini Mite 4 in the spring and finally getting some good practice with it since fall is here. I'm really enjoying all the benefits of a waterborne topcoat and the results are great. I've settled on General Finishes Enduro-var or High Performance as I'm having success with each. Here is my long-time Waterlox varnish recipe:

 

- Lockwood American walnut water based dye mixed 1 lb. in 4 gal. ratio

- Zinsser Sealcoat dewaxed shellac

- Varathane Gunstock oil based stain

- Waterlox original oil based varnish

- 50/50 mixture of Waterlox original/satin to knock down the sheen

 

How would you modify it for a waterborne topcoat? The dye/stain combo gives a look that either alone can't do. I don't mind using oil stain, but if there's a water-based that will do the same, I'm game. Here is the look I get with my oil recipe:

 

IMAGE_D4DB3F9A-F80B-4795-9D49-65905FE5D1

 

Here are my latest test boards (non-mission of course) using GF High Performance satin. 

 

IMG_0269.JPG

Lockwood fumed oak and most any brand red mahogany oil stain is real close to real fumed. You can even skip the red mahogany which is what I prefer. The biggest mistake I ever made was convincing my self to switch over to WB and leave the world of solvents and oils behind. Dont shoot yourself in the foot by trying to stick with a specific manufacturer or finish carrier.

  • 3 weeks later...
  • Author

Well I did a test board following the above recipe except replaced the Waterlox with GF High Performance satin. I let the Varathane oil-based dry for 4 days and sprayed 3 coats of the GF HP and it's dead on. The Waterlox was rubbed hard with a brown paper sack after 30 days and the waterborne is way smoother 2 hours off the gun. No odor after 2 hours with the waterborne compared to 30 days of "Febreze" from the Waterlox. 

 

IMG_0299.JPG

I'd keep the oil stains and shellac, and simply replace the Waterlox with something like General Finishes Enduro-Var.  

 

During your pre-project experiments (hint-hint...  :ph34r: ) try adding Trans-Tint Honey Amber dye to the WB finish.  I like 4-8 drops per quart, depending on what's underneath, and what wood we're coating.  I'd also probably add a layer of Sealcoat after the last oil stain, as a barrier.

 

What's interesting is that after staining and barrier coating, you'll see virtually zero grain raising with the water base, as you're applying it to shellac, not wood.

I agree with Barry, unless the color is off in the photo, the test sample needs to be warmed up a bit.

 

I never understood the hooplah over the Waterlox... I got a can and was underwhelmed... The sh.i.t stunk to high heaven for months after "curing" worse of it was that the panels I had used it on where for my own homes closets. The Mrs. was suddenly not a fan of woodworking :o:(

 

I have used GF HP over  a few projects and love it. Brushed or sprayed, it builds quick and rubs out well. Tough stuff.

Another thing...

 

I've had excellent results on QSWO using a yellow or amber dye, usually Solar Lux, as the first step to pop the flecks, and darker brown pigment wiping stains, usually Behlen or Mohawk fast-drying, later, with Sealcoat between layers.    If you screw up a pigment layer, you can wipe it off with mineral spirts and try again, as the spirits won't affect the shellac.

 

Each layer of Sealcoat adds a bit of ambering.

 

You can also finish with a dark wax, which will lodge in the pores and corners, enhancing an "old" look.   When choosing a wax, test carefully if you chose Briwax, as the tolulene it contains can mess with varnishes or water base if not fully cured.  Fully cured means fully crosslinked, not simply "dry", and can take weeks with both oil and water based varnishes.

  • Author

I have some Enduro-var but need the remaining for a bathroom project. Enduro-var adds a little amber but nothing like Waterlox does. The pic I posted today was a crappy iPhone pic. If you look at my first post you'll see the chair finish has good warmth, and when viewing with the naked eye, the GF HP topcoat matches it very well. Could be the dye, shellac, and stain give enough color that a dark vs clear topcoat doesn't matter. I'll look more closely tomorrow in good daylight.

 

  • Author

Barry - on the Transtint do you use it in all topcoats or just the first? I'm assuming adding to all would be fine and of course easier. 

Barry - on the Transtint do you use it in all topcoats or just the first? I'm assuming adding to all would be fine and of course easier. 

 

 

All...  The "amberness" increases with each coat.  For years, I've kept a tinted can on hand.   Try it to find what fits your taste. 

 

I find that 3-4 drops of honey amber per quart helps lots, without going far enough where the finish must be sprayed, due to potential lap marks.   The layers of Sealcoat help a lot, too...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.