Ozwald Posted October 9, 2013 Report Posted October 9, 2013 After a disheartening deal went south with Lowes over a jointer, I was seeing what my options on Craigslist were (which in a rural area like this usually isn't much worth looking at). A guy put up his barely used lathe last night. I've been wishing for a bigger lathe that didn't require constant belt changes, so I thought I'd at least give it a look this morning. We settled on a very fair price & I'm now the owner of a basically brand new Delta 14x40" lathe! It came with the manual, a beginners book of some sort (didn't really look at it yet), an extra banjo and a 8 piece beginners chisel set in a plastic Delta case. The chisels are all carbon steel & I already have the HSS version of all of them, but I'll probably clean them up & stash them away for backups or to keep with the lathe if I ever choose to sell it. He was a really nice guy & as I was heading out he pointed out a large piece of cedar on the top shelf. He turned a lamp from another piece of it (possibly his only project on the lathe?) & ended up giving me the rest, roughly a 3' x 20" x 20" octogonal 'log'. Turns out (pun intended) he was a furniture maker who was giving the lathe a try but his first serious catch scared the crap out of him. That combined with a stroke last summer meant the lathe had to go. I'm pretty sure he was glad to see a more experienced turner happily taking it back to a loving home where it will be cherished for many deep piles of sawdust to come. She's home & down in the shop now, anxiously awaiting the cleanup/detailed inspection tomorrow morning. She's in almost new condition, but the tool rest could used filed, some nuts adjusted and the bed needs waxed. I did throw my Nova G3 on her & made a few shavings just to hear her purr. I haven't named her yet, but this one certainly deserves a good name. Anyhow, if you've made it this far, I apologize for boring you to death with my unexpected day, but I thought a lathe this size was only going to be a dream for many years on my budget & was quite a nice surprise after the 'Lowes Jointer Incident' that really had me down. Quote
Byrdie Posted October 10, 2013 Report Posted October 10, 2013 I think you should name her "Dawn." What's that flower she's got on? Quote
Ozwald Posted October 10, 2013 Author Report Posted October 10, 2013 Off the headstock? Just the power switch under a big red stop cover. It's kind of odd since my HF has it on the lower right so I'll have to break that muscle memory, but all in all it's a much more logical place for it if not a bit high. But the headstock both slides & pivots, so lower probably isn't a great option either in some cases. Late last night I settled on "Lily". She sounds sweet, but you know you've got to keep an eye on her or she'll really ruin your day. I thought it was fitting. Quote
Schweitzerbube Posted July 8, 2016 Report Posted July 8, 2016 Hi, Ozwald! Is there any way I might obtain a copy of those two documents (the manual for the 1440 and a beginner's book)? I acquired a used 1440 yesterday, and am a total newbie at turning! Regards, Schweitzerbube Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.