Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing Over Burn Patterns.

Featured Replies

I recently turned a bowl out of olivewood and I would like to, first, carve a design, using a Dremel, into the bowl and, second, burn the pattern, with a burning tool, that I just carved so that all the lines are black. However I haven't been able to find any information on what finish I should use over something that has some areas burned and others untouched. Any thoughts about this would help! Thank you

yeah, anything goes! pyrography can get pretty amazing pretty quickly. if you go too hard or leave the burning tool in the wood too long, you can get some soot so you may want to take a light weight brush after it's cool and brush off any soot. be careful as the soot can stain certain parts of the wood. it's not like you're going to take a blow torch to it....

post-7460-0-47160100-1382846881_thumb.jp

I recently turned a bowl out of olivewood and I would like to, first, carve a design, using a Dremel, into the bowl and, second, burn the pattern, with a burning tool, that I just carved so that all the lines are black. However I haven't been able to find any information on what finish I should use over something that has some areas burned and others untouched. Any thoughts about this would help! Thank you

I am doing something similar. If you want to leave the natural wood color that should be fairly straightforward. I like a product made by Krylon called Matte Finish, product number 1311. It can be purchased online or at certain Walmarts, check on walmart.com to see if your Walmart has inventory. It is in a spray can and is used to seal artist works and is non yellowing and almost instant drying. Although it is matte finish it can be buffed to a pleasing sheen. Put on 3 or 4 or more light coats before buffing so that your design won't be disturbed. Very nice product.

Cindy

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.