rlatrelleg Posted November 26, 2013 Report Share Posted November 26, 2013 I'm using an oil/poly finish on a box. I want to embellish it a bit more, and I was wondering what kind of glue can I use to bond metal to the oil/poly? Should I just sand the area, it is a complex shape so not should it will come out right... Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted November 26, 2013 Report Share Posted November 26, 2013 If finish is fully cured, an epoxy might work, but if it were me, I would remove the finish to bare wood. Quote Link to comment Share on other sites More sharing options...
..Kev Posted November 26, 2013 Report Share Posted November 26, 2013 Or tape off the area to be glued before applying finish. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.