Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Exterior Entry Door Finish

Featured Replies

Hi to all,

I just received my new front door from T. M. Cobb and it's beautiful! It's a Craftsman style in walnut but unfinished. I really like the natural walnut color so my question is, what are my options for finishing the interior but more importantly the exterior surfaces so that it enhances the natural colors and gets the protection from the elements here in coastal San Diego to make it last? I've read a few suggestions to use hand rubbed tung oil and reapply once a year?, or for a poly urethane clear and reapply every second year? Do I need to stain because it bare wood? Also, is this something a DIY'er should attempt or should I hire a pro?

Thanks a bunch,

-raul

TM Cobb .. I assume you are in Southern California which changes everything. I use sikkens for exterior use, they have a natural finish, using a stain over walnut is a mortal sin.

First coat Cetol 1

Second and third coat use cetol 23

Your door's finish will never crack, will look great forever.

Don't forget to seal really well the endgrain in the bottom and top.

This is my area of expertise. I build and finish doors. There are some fantastic methods that are really time and labor intensive and therefore expensive. But if you do it yourself u might try it. Look at Smith clear penetrating epoxy sealer and top coat it with several coats of epifanes varnish for the longest lasting finish. It will take about 2 weeks to complete this system.

But what we do is stain then apply 3 coats of marine poly ON ALL sides. Don't use a different product on the inside. If it gets direct sun, lightly sand and re coat the exterior at least once a year. You want to do it when it's still in great shape not when it shows signs of age. Don't use tung oil or other interior products. Don't use water soluble product either. Don't use furniture polish or any other claimed protectant. Just clean with soap and water.

There is really no way to avoid maintenance on stained exterior wood. You gotta sacrifice a layer of topcoat every year to the sun.

Best of luck

Steve

Ah .... forgot ... cetol 23 is ilegal in southern cal so you have to bring this stuff from vegas or arizona

Bobby, what I have seen of the sikkens stuff looks dead and lifeless. No sheen at all. It's more of a fence and deck product. There is no coating buildup to smooth and seal the surface from moisture. Is that what you are talking about? Or do they have another line that I'm not aware of? Door manufacturer warranties will likely not cover (I've looked at dozens over the years) an exterior door with no film coating.

Walnut with turn very light in a few years in the sun. I do stain it in a medium walnut color to lessen the effect. A walnut stain on walnut doesn't really alter the normal beauty and it lessens the sapwood contrast. I always recommend it after the first door I did in walnut turned as gold as maple in the second year.

Steve

  • Author

So, maybe a walnut stain to lesson the fading over time, followed by multiple coats of a high quality exterior grade sealer. Great info, thank you both.  I'll continue to research for now.

-raul

Bobby, what I have seen of the sikkens stuff looks dead and lifeless. No sheen at all. It's more of a fence and deck product. There is no coating buildup to smooth and seal the surface from moisture. Is that what you are talking about? Or do they have another line that I'm not aware of? Door manufacturer warranties will likely not cover (I've looked at dozens over the years) an exterior door with no film coating.

Walnut with turn very light in a few years in the sun. I do stain it in a medium walnut color to lessen the effect. A walnut stain on walnut doesn't really alter the normal beauty and it lessens the sapwood contrast. I always recommend it after the first door I did in walnut turned as gold as maple in the second year.

Steve

 

Agreed, I spent 15 years at Buffelen that was a long time ago when they did everything. There is no finish that is going to last very long without maintaining. Every year or two  is pretty standard to keep them looking new. I think in the lab they are getting four out of the ICA. Stay away from dye stains.

Steve

 

They have a door and window product which I never used. They claim is fantastic.

 

I used the SRD product and is not even close to performance to Cetol 1 + 23.

 

Bobby

Bobby, what I have seen of the sikkens stuff looks dead and lifeless. No sheen at all. It's more of a fence and deck product. There is no coating buildup to smooth and seal the surface from moisture. Is that what you are talking about? Or do they have another line that I'm not aware of? Door manufacturer warranties will likely not cover (I've looked at dozens over the years) an exterior door with no film coating.

Walnut with turn very light in a few years in the sun. I do stain it in a medium walnut color to lessen the effect. A walnut stain on walnut doesn't really alter the normal beauty and it lessens the sapwood contrast. I always recommend it after the first door I did in walnut turned as gold as maple in the second year.


Steve

The smith cpes is claiming 5-15 yrs on boats in full sun without maintenance. It essentially glues the varnish to the wood fibers.

I just quoted a job using it. If I get it ill confirm or deny that claim in 5 yrs.

Steve

==> The smith cpes is claiming 5-15 yrs on boats in full sun without maintenance

 

I've got CPES-based projects going-out 5-7yrs, no-problem. 15 years --- well, not too sure about that one... It's well-respected in the marine environment and have used it on brightwork for ages...

 

The Chris Craft guys are the maintenance gurus -- you can probably get a good feel on CPES/top-coating by visiting their forums: http://www.chris-craft.org/discussion/

 

JamestownDistributers has a good video series on CPES/Varnish: http://www.jamestowndistributors.com/userportal/document.do?docId=533&title=Epoxy+Sealing+with+Natural+Wood+Appearance+-+Smith+%26+Co.

 

 

The key is a good high-solids UV top-coat. If you maintain the top-coat, the CPES should last a long time...

Finish claims are mostly just claims. Also check to see if your door is stave core or solid don't trust the word "solid" from the manufacturer because stave core is considered solid in the industry. Stave core does not need the extreme levels of finish that solid doors do. Even off the shelf quality spars are plenty for stave core as long as they have UV inhibitors and you are willing to maintain yearly.

SRD is another Sikkens product and I did not like how it performs.

 

SRD ?


Steve

  • Author

I'll look into the type of "solid" door,(good to know info for sure) but I ended up choosing Smith's CPES and Epifanes Extra UV Filter High Gloss Clear Varnish and Brush Thinner. I'll start the process soon in my garage and look to apply 3-5 varnish coats after the CPES process.  I also purchased an interior/exterior "Matte" finish that I plan to use as a finish coat if the hi-gloss is too much for the eyeballs and maintain as needed from there on.

Looking forward to getting started, I'll post some pics as I go.

Thanks again for all the help!

-raul

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.