Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Whoops! Poly over alkyd

Featured Replies

So...I know very little about finishing. I made some small pedestals with concave sides, and decided doing some kind of wipe on finish would be easier than brushing on polyurethane. There was LOTS of end grain exposed (they were laminated cubes that I then shaped to have curved sides) so I wanted to saturate the end grain before I added the poly so i wouldn't have to worry about the poly looking funky. We hade some sherwin williams "natural" wood stain (no pigment) which I assumed was like danish oil (which I assumed was basically oil, poly, and thinner). I put on a couple coats of that, then wiped on some Sam Maloof oil/poly blend finish. As I was wiping it on today, I noticed the ingedients on the sherwin williams stuff. It was alkyd polymer, mineral spirits, and some other chemicals. Is having the poly over the alkyd going to cause me any issues? Also, does anyone know if the sherwin williams stuff would have been good enough protection after about 5 coats or so? These pedestals are for a coffee shop amd will be handled a lot every day, and likely come into contact with water.

I'm not familiar with "alkyd polymers"...I tend to keep my finishes simple because there's usually no need to complicate things.  But generally the rule is, you can put anything on top of anything as long as the first application is fully cured before switching to the second.  Whether or not it will look good...who knows?

Alkyd is oil base friendly and you should be fine. If it's going to live in a coffee shop a full coat of varnish might be better at dealing with the water and abuse. Wipe on finishes are pretty thin.

  • Author

Yeah, I was afraid that I would need a thicker finish. Any tips on getting the poly to look good with the curves? I do not have spray equipment. Sorry, I can't upload photos right now. It's just a 5" x 5" x 5" pedestal with a flat top and bottom, and all the sides curving in about an inch.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.