Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

OCD and insulation

Featured Replies

We I finally got employees out of my shop and into the new building and now am battling ocd. The stuff hanging open on the walls is driving me nuts. Im thinking about making thin cabinets to put in between the studs so they sit close to flush with the wall. Is there a thin insulation say 1" thick that is good enough to go behind the cabinets. I bought a bunch of rolls to put up this summer but it's too thick.

1" rigid foam(polystyrene, polyisocyanurate) will give you an r-value of 6.5. In your nw climate I would say if you are trying to hold temp in the shop this will prove insufficient. 

  • Author

1" rigid foam(polystyrene, polyisocyanurate) will give you an r-value of 6.5. In your nw climate I would say if you are trying to hold temp in the shop this will prove insufficient. 

 

Thats what I was afraid of. I suppose a 3/4 plywood back doesn't really ad much of anything?

R value per inch of closed cell foam is around 6.2-6.8. That's spray foam. You can spray and trim back or install the cabinets with sheet backing and then shoot to fill.

On a 6" wall with rigid, you're not going to get much.  With that said, it depends on what you need.

 

I live about 100 miles North of you and would consider it if the wall wasn't getting pounded with the usual prevailing wind. 

On a 6" wall with rigid, you're not going to get much.  With that said, it depends on what you need.

 

I live about 100 miles North of you and would consider it if the wall wasn't getting pounded with the usual prevailing wind. 

You mean a 2x6 wall? With rigid foam you can obtain r-35.75. That's a full fill of course. 33.5 if you leave 1/2" air space.

You mean a 2x6 wall? With rigid foam you can obtain r-35.75. That's a full fill of course. 33.5 if you leave 1/2" air space.

 

No, I was assuming just 1 sheet of rigid insulation so he could recess the cabinet..  I know you can insulate well in a wall that size.

Well he can place 2" in the wall, which will give you r-13. Not the best, but not too shabby. That'll let you recess your cabinets 3.5" into the cavities, sheetrock with 5/8 and your cabinets are recessed over 4" in the wall.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.