Dave F Posted October 13, 2010 Report Posted October 13, 2010 Has anyone had any experience with the Kreg Precision Router Table Lift system? http://www.woodcraft.com/Product/2080358/28975/420-Precision-Router-Table-Lift-Kreg-PRS3000.aspx?ss=c28ee1b9-0294-4674-b88a-7905987866c5 I was playing with one at Woodcraft today and I though it was pretty nice. Kinda smart how they have the gross adjustment with the spring loaded key shaft thingy, then precision adjustment with the thumbwheel built into the plate itself. My only concern would be the placement of the thumbwheel. Any problems accidentally hitting it while running a workpiece through? Can you adjust the thumbwheel tension? Any feedback would be appreciated before I go spend $330.00 on one. Thanks. Quote
Ben H Posted October 13, 2010 Report Posted October 13, 2010 It's a blue Woodpecker . You'll more than likely find more info on the WP version. Do a search on Woodpecker PRL-V2-350, I'm sure it's a fine lift. I've always been fond of WP stuff. Well made. I spoke with the owner of Woodpecker at WIA a few weeks ago. She said they are making a lot of stuff for Kreg now. You should find the WP cheaper, although it will be red. I suppose it boils down to how much is blue anodize worth? Quote
Dave F Posted October 14, 2010 Author Report Posted October 14, 2010 Ahhhh, cool. Thanks Ben, I'll look into that. Quote
DALSAW Posted October 19, 2010 Report Posted October 19, 2010 I've had the Kreg lift for a little over a year now. I haven't hit the thumbwheel before, allthough it could be possible when fliping a board over to bump it. They seemed to have recessed it just enough in the plate to avoid a work piece rubbing on it during use. I don't know if it has an adjustment for the tension on the thumbwheel, but I havn't never looked the wheel on mine is still pretty tight. I don't really use the wheel that mutch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.