Boerseun Posted May 20, 2014 Report Posted May 20, 2014 After shutting down my shop and selling all of my industrial machines I was the lucky recipient of a Craftsman 315 series - the saw has run well for the past 6 months but recently it has developed a nasty tick/knock which seems to be stemming from the arbor assembly - does anyone have experience in this area? Quote
EdgewaterWW Posted May 20, 2014 Report Posted May 20, 2014 This is a belt drive not a direct drive, right? A ticking sound from the Arbor is probably a bad bearing. To test remove the belt and throat plate insert, spin the motor by hand and the arbor, checking for this sound. If sound is still/only from the arbor, remove blade, turn arbor by hand and check for play, sound and that it turns smoothly. By now you should have found where the sound is coming from or have narrow it down to the arbor bearings. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.