Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Topcoat question

Featured Replies

Hey guys. Finishing up a wall hanging cabinet. I am using general finishes dye stain. Looking advice on finishing it up.

1. Do I need to use shellac before a topcoat?

2. Thinking of using general finishes water based. Good idea.?

3. Semi gloss Or satin

Oh yeah it's tiger maple. Whew almost forgot to put that in there. Lol

Sent from my iPad using Tapatalk

Since the dyes are water-based and the top-coat is water-based, you'd want a light seal coat of shellac or you'll possibly pull up the dye while brushing on the top coat.  If you are spraying, you could skip the shellac and mist a light coat, give it a little to set up, then finish the spray schedule.

 

I like their water based finishes.  Mostly use PolyAcrylic but High Performance is also very nice.  Haven't used the others yet.

 

Maple can blotch so you might consider a coat of Charles Neil blotch control before starting with the dye.  Some people use shellac as a blotch control, but I have no experience with that.

  • Author

Thanks Paul that's kind of the path I was thinking with the shellac since I am brushing. Always good to get other opinions and points of view

Sent from my iPhone using Tapatalk

Just skip the General Finish and use shellac, be done with all your finishing in the time it would take one coat of waterbase to dry.

A nicely figured wood like tiger maple needs to be planed or scraped to really pop the figure, you don't say anything about stain so I don't understand the comment about blotch control. Either finish should be fine the WB will give a more natural color to the wood where the solvent based finish will give that classic amber color.

walnut.jpg

 

Here is a picture of a figured walnut board. The right hand side was scraped with a card scraper the left side sanded with 180 grit sandpaper. See how much more the figure pops when the fibers are sheared?

From the original post, first line: "I am using general finishes dye stain"

 

Hey guys. Finishing up a wall hanging cabinet. I am using general finishes dye stain. Looking advice on finishing it up.
1. Do I need to use shellac before a topcoat?
2. Thinking of using general finishes water based. Good idea.?
3. Semi gloss Or satin

Oh yeah it's tiger maple. Whew almost forgot to put that in there. Lol


Sent from my iPad using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.