BuilderBill Posted June 6, 2014 Report Posted June 6, 2014 I've been looking for one of the old-school industrial drill presses for a long time, missed out on the General selloff when they discontinued their Canadian production and had just about resigned myself to sticking with my Delta 15-091 made in 1974 in Canada that I rebuilt. Or possibly picking up an old PM 1150 and going down the rebuild road again, not something I really wanted to do. Someone over in the FOG posted an eBay link, followed it and did some research, ended up with this after a 18-hour round trip to Columbus, Ohio: That's with the low-voltage control box removed, fabbed up a mounting plate and installed the VFD, it now looks like this: In a nutshell, 280 lbs of NOS Delta industrial drill press made in Green Bay, Wisconsin by Lindquist Machine Corporation that took over production of the Delta industrial line in the early '90's before Pentair sold Delta to Stanley/B&D. They continued production through 2011 when Stanley/B&D sold the Delta logo to Chang Type Machinery in (take a wild guess). Mine is a 2010 model, brand-spanking new, never even had a power cord attached. 6" quill travel, 3/4 hp Leeson motor(made in the USA), 6 step pulley and a quill with 6 splines and 4 bearings. The table with its' rack-and-pinion crank assembly weighs almost a hundred pounds by itself. If you want one you can go to Amazon Supply and buy the single-phase version although their photo is wrong, the 15-232 has the small tilt table instead of the production table shown in their photo. Bonus score: P-C 7538 3-1/2 hp plunge router, ditto NOS and made in USA: I also got to visit Wood Werks Supply, met the owner and some of the staff, was absolutely smitten by their showroom. Nothing like that here in Atlanta, would have loaded up the Visa but the 4Runner had all it could hold. Great folks, buy something from them if you can. Long day but glad I made the trip. Thank God for Starbucks! Best, Bill 1 Quote
mikem Posted June 8, 2014 Report Posted June 8, 2014 I live about an hour and half from Wood Werks. I have only been there once, but it is an awesome store! Definitely worth the drive to see it. Quote
woodieboy Posted June 9, 2014 Report Posted June 9, 2014 Looks great. Enjoy your new tool! Definitely a nice score! Quote
BuilderBill Posted June 11, 2014 Author Report Posted June 11, 2014 Thanks guys for the comments! Got the spanner last Friday from Delta to remove the Jacobs chuck, got the Albrecht keyless and my surface-ground aluminum table from the old press installed. Table shimmed up fine, square to <.002 in a 5" radius, had to remove and rotate the chuck 180 degrees but runout is now about .0005-.0006" on a 1/2" precision-ground steel dowel, hard to tell with a 1"-range dial indicator. Good enough for me! All dressed up: Thanks again! Best, Bill Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.