Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sanding gel stains

Featured Replies

I just finished a piece with a GF gel stain, and I plan on putting a couple (thin) coats of GF gel top coat on once the stain is dry. Should I be wet sanding the gel stain before I put the top coat on, and if so, what should I be using as lubricant? 

 

If it helps, it is a small bookcase from QSWO. 

if the gel stains raised the gain you need to give it a light sanding maybe with 320 -400 .  Make sure when you use the gel top coat you even the layers out , its doesn't flatten out very well .  You could probably wipe it on with a rag ( clean t shirt)  just make sure you get the runs  . 

  • Author

I'm still new at the finishing-thing and wasn't sure if I'm supposed to sand between coats (as a clear coat will go over this for protection)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.