Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Anita some wood

Featured Replies

Hey everybody.

i have several different articles explaining s2s, s4s etc. my question is after you purchase do you work on that afternoon or should have wait a week or so?  

This truly depends on several factors. The way the wood was stored in relationship to the atmosphere of your shop is one. The size of the lumber in relationship to final size is another. Re-sawing might make sense to hurry up acclimation if pieces are well over size. Otherwise, waiting until the wood is stable makes the most sense. 

A moisture meter and an understanding of typical ranges of humidity in your area are going to be your best friend when trying to answer this question. If the wood is 'wet' compared to typical ambient humidity percentages in your area, you're probably going to want to hold off a bit and let the wood acclimate.

Like a lot of things though, it depends. When I ordered all of the ash for my roubo workbench it was a special order (they don't keep 8/4 ash in stock) and my lumber supplier had it shipped up with their normal weekly shipments. Not knowing the entire path that the lumber traveled, I went ahead and let it rest for about two weeks or so and I did have a couple of boards exhibit some pretty substantial movement. When I buy stock that they have on hand, I don't worry about it as much because it's all indoors and it is generally safe to assume that it has been inside and adjusting to typical room conditions for a while. I'll normally hold off on doing anything with it for 2-3 days and if I don't see much movement, I'll go ahead and start using it. If your lumber yard is outdoors there is a good chance that you will want to bring it into the shop and let it adjust.

It's going to vary considerably depending on where it came from, the conditions there, how it was stored, transported, etc. The only real way to know for sure is to break out the moisture meter.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.