Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Ceremonial coin holder in Walnut

Featured Replies

I was asked to build 10 ceremonial coin holders in Walnut and these will be used for going away gifts.  The blanks will be laser engraved with the recipient's info as needed.  These are not complicated at all but I thought it would be neat to video the light production on the CNC.  The CNC only represents a very small step of the build process but it was fun so I posted the video. 

The bulk of the machining was on the table saw but I also used the planer, drum sander, jointer, router table, and stationary belt sander.  These are finished with one coat of sanding sealer and one coat of gloss Nitrocellulose lacquer.  The top piece is held in place with two #10 biscuits and a screw and the slanted face is cut on a 25° angle.  The base is 4" x 8" and the top piece is 1.5" high x 7" long.  The slots were cut with a 1/8" spiral downcut bit at 18,000 rpm at 100 ipm feed rate.  I don't have a flat bottom blade for the table saw and wasn't going to buy one for this job so that made it an easy call to use the CNC for the slots. To help the laser shop on the engraving process I built a simple fixture to hold the top piece front slant level in their machine.

008%20-%20Walnut%20coin%20holders_zpswf3

009%20-%20Walnut%20coin%20holders_zpsx0a

Short video on cutting the slots -
Enjoy! David

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.